In the Maker Shed: Make Controller 2.0 & Interface Board kit

Technology
In the Maker Shed: Make Controller 2.0 & Interface Board kit
IMG_7769.JPG

The Make Controller 2.0 & Interface Board kit from the Maker Shed is a great way to get up and running with this micro-controller. Adding sensors and motors has never been easier.

The Make Controller is built around the AT91SAM7X256, and adds the essential components (like the crystal, voltage regulator, filter capacitors, etc.) required to run it, while bringing almost all the processor’s signal lines out to standard 0.1″ spaced sockets. The software environment remains constant no matter what you plug the Make Controller into – the firmware libraries are organized and documented, making it clear which are compatible with the Controller and Application boards.

The Interface Board makes it easy to connect and communicate with your favorite devices with up to 35 general input/outputs, 2 serial ports, TWI, CAN, SPI along with Ethernet and USB. All pins are 0.1″ spaced for easy insertion into your prototyping breadboard.

More about the Make Controller 2.0 & Interface Board kit

Discuss this article with the rest of the community on our Discord server!
Tagged

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK