Here’s a really easy and clever fix for an Ethernet (RJ-45) plug, using two zip ties to replace a broken locking tab on the plug.
Repair a Broken Ethernet Plug
Discuss this article with the rest of the community on our Discord server!
Gareth Branwyn is a freelance writer and the former Editorial Director of Maker Media. He is the author or editor of over a dozen books on technology, DIY, and geek culture. He is currently a contributor to Boing Boing, Wink Books, and Wink Fun. His free weekly-ish maker tips newsletter can be found at garstipsandtools.com.
View more articles by Gareth Branwyn
ADVERTISEMENT
Related Articles from Make:
I think it would actually be easier and faster to just crimp a new end on the cable…
For those who don’t own a crimping tool, this is a saver. More important, this is totally in the spirit of “doing it yourself”.
I remember about living in an apartment where Ethernet cable just came out of the wall. The plug was already broken. I was specifically disallowed to install a wall socket (go figure) so that broken ends could be simply fixed by anyone buying a new patch cable. Eventually, after a few months of frustration and acrobatic attempts to keep the plug from falling out, I had an opportunity to borrow the crimper and fix the plug – nobody in the vicinity had the tool or was willing to lend it for an evening.
Hi! thank you for these tutorials! In my case everything is too complicated. I have done such repairment for 5 times. At first it helped me but now I want to buy new one. I had Chines’s cable and I know that it is not very good. I want ot buy something expensive but with good quality. I read a lot about European producers – all comments say that it is good. Have you ever heard about phoenix (http://electrical-components.com/phoenix) Is it good? They have big range and prices are normal. i need an advice. Thank you!