Homemade Panaplex display

Craft & Design Science
Homemade Panaplex display
panaplex_1.jpg
panaplex_2.jpg
panaplex_3.jpg

My friend Jon Singer sent me a link to this fellow’s homebrewed Panaplex display, using a jam jar as the vacuum chamber. Panaplex is a kind of gas-discharge plasma display tech related to the Nixie tube. The builder, Lindsay Wilson, explains the basic setup for his display:

The entire thing is based on using a jam jar as a vacuum chamber. Each of the cathode electrodes is made from a 2cm length of copper wire. A stainless steel M3 screw is soldered to the middle of the wire. This allows it to be screwed to the support plate, which is made from a piece of ceramic tile. It was very easy to drill the 3mm holes with a diamond drill – the tile is made from sintered ceramic powder and is quite soft. A solder tag is mounted on the back of each cathode screw which allows electrical connection to be made to the respective cathode.

For an electrical feedthrough, I was lucky enough to have two multi-pin feedthroughs I found in a skip a few years ago. These are quality jobs – circular Amphenol connectors and proper glass/metal hermetic seals around the pins. The support plate with the electrodes is mounted on the main body of the electrical feedthrough.

An insulating collar sits between the feedthrough flange and the jam jar. The anode grid is mounted on this and is made from a piece of aluminium window screen. A gas inlet and vacuum line are also connected to the collar. I made the collar from PVC which is probably the worst material possible for vacuum use, but it did alright.

Finally, the jam jar sits on top of the collar with a piece of inner tube acting as a gasket.

[Thanks, Jon!]

Panaplex display

2 thoughts on “Homemade Panaplex display

  1. MadRat says:

    Does it give off a lot of x-rays?

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

Gareth Branwyn is a freelance writer and the former Editorial Director of Maker Media. He is the author or editor of over a dozen books on technology, DIY, and geek culture. He is currently a contributor to Boing Boing, Wink Books, and Wink Fun. His free weekly-ish maker tips newsletter can be found at garstipsandtools.com.

View more articles by Gareth Branwyn

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK