We’ve featured our fair share of pinhole photography projects here at MAKE, and it’s no wonder. As complicated as cameras have become, it seems amazing that photos can be taken with something as simple as a tiny hole in a shoe box. But if you still yearn for all the creature comforts that a modern-day DSLR affords and you want to experiment with pinhole photography, you’re not out of luck. This quick hack turns your DSLR into a rather advanced pinhole camera.
Subscribe to the MAKE Podcast in iTunes, download the m4v video directly, or watch it on YouTube and Vimeo.
You’ll need to use a spare camera body cap, which is normally meant for protecting the camera from foreign matter entering through the lens port when there’s no lens attached. If you always keep a lens on your SLR, you can use the body cap that came with your camera. But if you store your camera without a lens, you’ll probably want to pick up a spare. Luckily, they’re quite cheap. Simply cut a hole in the center of the body cap and tape a small piece of needle-pricked aluminum foil. The larger the hole is, the more light will hit your camera’s sensor. The tradeoff is that the picture will be more blurry.
What’s great about DSLR pinhole photography is that you can combine it more easily with other photography techniques such as HDR or timelapse for an interesting effect. And if your DSLR supports video, you can even shoot pinhole video. If you shoot any cool photos with your pinhole DSLR, share them with the rest of us! Post them to the MAKE Flickr pool.
11 thoughts on “How-To: DSLR Pinhole Photography”
Comments are closed.
ADVERTISEMENT
Join Make: Community Today
Wow, I think I need to try this
Is there such a thing as “pinhole” filter in Photoshop to achieve the same effect with regular pics?
I make “pinholes” for photography by interleaving 3 or 4 razor blades (the old “spineless” double edge blades (or similar) work best. Gang them around a small needle (quilting needles are good). remove the needle and push the blades closer together until you get the size hole you want, then tape the blades together. The sharp edges help the crisp focus of the image. You can actually use one blade bye carefully breaking it into the number of pieces you need. Use the cutting edges to make the pinholes. This technique is the best I have found outside of buying precision made pinholes.
I’ve seen progression in every post. Your newer posts are simply wonderful compared to your posts in the past. Keep up the good work! http://styleabilities.com/elgg/pg/blog/haoqi
Came to see a good post, very good. Thank you!
Came to see a good post, very good. Thank you!
Came to see a good post, very good. Thank you!
Well written article.I appreciate your writing skills.Super pics.You have done a great job by sharing this article with us.I like these pics. Keep sharing with us.
Well written article.I appreciate your writing skills.Super pics.You have done a great job by sharing this article with us.I like these pics. Keep sharing with us.
Well written article.I appreciate your writing skills.Super pics.You have done a great job by sharing this article with us.I like these pics. Keep sharing with us.
[…] got it? Now check out the video here and turn that “thing” into a useful pinhole […]