Cool vid from our pals at TAP Plastics showing how to build a strip heater, which is commonly referred to as a “plastic bender,” but really doesn’t do any bending in and of itself: It’s just a long skinny heating element that makes it easy to soften a sheet of plastic along a straight line, so you can bend it with your hands to an arbitrary angle, and/or against a jig for more precise control of the bend. Misnomer aside, it’s still a very handy tool to have in your shop, and a load of fun to use, and fairly easy and inexpensive to DIY, to boot.
If you don’t want to shell out for a new heating element, they can be recovered from a junked space heater or (like this one from Instructables user xeijix) from an old toaster.
6 thoughts on “How-To: Homemade Plastic Bender”
Comments are closed.
ADVERTISEMENT
Join Make: Community Today
That was a nicely informative (and quaint) video – thank you for posting it!
If TAP has anymore please be encouraged to list them. thank you.
Wow… I would use a multimeter to test that ground. Use the resistance setting, testing the foil to ground prong on the extension cord resistance and ensure it is low. I’d probably also think of using this only in a GFI outlet for extra safety.
If I was using this long-term, I’d consider rewiring the heater plug & ground with a real 3-prong screw down plug instead of the 2 prong + shove ground wire method to ensure that everything had a good connection.
Wow… I would use a multimeter to test that ground. Use the resistance setting, testing the foil to ground prong on the extension cord resistance and ensure it is low. I’d probably also think of using this only in a GFI outlet for extra safety.
If I was using this long-term, I’d consider rewiring the heater plug & ground with a real 3-prong screw down plug instead of the 2 prong + shove ground wire method to ensure that everything had a good connection.
Wow… I would use a multimeter to test that ground. Use the resistance setting, testing the foil to ground prong on the extension cord resistance and ensure it is low. I’d probably also think of using this only in a GFI outlet for extra safety.
If I was using this long-term, I’d consider rewiring the heater plug & ground with a real 3-prong screw down plug instead of the 2 prong + shove ground wire method to ensure that everything had a good connection.
I built something similar a few years back using a discarded bathroom 1kw heater. I have put a picture up and a bit of a description on my flickr page.
http://www.flickr.com/photos/mrsuperpants/6150337447/in/photostream
This is a great video showcasing our BriskHeat Plastic Bending Strip Heater and the How to make a strip heater instructions!
BriskHeat Plastic Bending Strip Heater:
https://www.briskheat.com/how-to-make-a-strip-heater-for-forming-acrylic-sheets
How to Make a Strip Heater for Forming Acrylic Sheet
https://www.briskheat.com/how-to-make-a-strip-heater-for-forming-acrylic-sheets