Zoe modeling her costume
Zoe modeling her costume. Photo: Emily Rose

Earlier this summer, Emily and her daughter, Zoe, were at a local garden at the Colorado State University campus when Zoe found a baby praying mantis crawling up her shirt and down her arm… Zoe was delighted! As the baby mantis crawled over Zoe’s arm hairs, she decided to name him “Hairy”. She was so enamored that she decided on the walk home that she wanted to be a praying mantis for Halloween.

photo: kate -more info coming
photo: Kate Edberg

Always the avid costumer, Zoe was making mock ups for her Monster High dolls through the end of summer and up until the start of October. Using felt, cardboard, and hot glue, she had made a scaled down version of the costume she wanted to make for herself. Emily and Zoe built off of that model and got the project moving at the start of October. It amazed us all at the end, but prototyping and some unexpected inspiration got Zoe from inspiration to finished product.

photo: Emily Rose
photo: Emily Rose

Project Steps

THE HEADPIECE

The top of the headpiece was made from cardboard and papier-mâché, with halved styrofoam balls for the eyes. The mantis face and eyes were painted with acrylic paints, with a bit of clear coat on top for added water-resistance in case the weather on Halloween turns a bit wet. Pipe cleaner antennae finish the look.

1-Mantis_Headpiece-Beanie-with-chinstrap-mount_PLEASENOTE-all-showing-styrofoam-and-carboard-painted-with-acrylics-and-polymer-clear-coat-for-water-repellence
All process photos: Emily Rose

Here is the underside of headpiece. The cardboard here is lined with green duct tape and attached to a green beanie with chin ties. Under the duct tape on either side, Zoe inserted puffy craft store pom-poms into “pockets” to help stabilize headgear and cushion her head.

2-Beanie-mounted-headpiece_duct-tape-for-color-also-holdis-padding-to-help-stabililize
In the hat-down configuration, the mantis mask completely covers Zoe’s face. Emily and Zoe had talked about using mesh on the front in the same color, but Zoe didn’t think that would look good. So this is the “at-the-door” configuration for Halloween night.

4-Headpiece_down-position_Considered_green_mesh-Zoe-didnt-like-idea-so-travel mode-is with-hat-pushed-back

The door-to-door traveling mode for Halloween has the hat up, showing Zoe’s face. Zoe’s school is letting students wear their costumes today, but wouldn’t allow masks — what’s this world coming to? — but because the headpiece can be worn up, this will work just fine. “The whole costume is comfy,” says Zoe. Great!

LEGS

 

3-Hat-Mounted-on-Beanie-Cap_Note-chin -ties

The supernumerary legs — beyond the two that Zoe came with — were made with the cardboard tubing from rolls of gift wrap. A section of the tube was slit down the side and tapered, so that the leg segments would nest at the joint. Once the felt was hot-glued on and tucked up into the joints, they really looked like actual segmented insect legs.

The arm structure consists of two parts: forearm and claw. The forearm is a piece of tri-folded cardboard and the claw is a cardboard tube cut and taped into a pointier, more insect-like shape. The outside of the forearm was painted with green acrylic and topped with a polymer clear coat, but the rest they covered with green felt. Jagged edges in the felt were added to the edges to give a more accurate look.

6-Mantis-arm-base_Gift-wrap-tubes_one-slit-to-nest-in-other_Forearm-blank_and-pointyier-arm-blank-trifold-and taped-for-mantis-claw_Felt-jaggies-for-accent-and-accuracy

To complete the arm assemblies, they attached the claws at an angle and added some functional structure to the inside of the forearm. The pipe cleaner in the center maintains the structure of the forearm and the two elastic straps keep the arm assemblies on, while still leaving room for free hand movement.

7-Completed-forearm-assemblies_Dual-elastic-straps&pipe-cleaner-for-structural-strength
When Zoe wheres her mantis arms, her hands are still functional. The elastic is tight, but not too tight, which is good because Zoe will be bundled up for some chilly trick-or-treating.

8-Mantis-Forearm-Assembly_Loot-Bag-Carrying-no-problem

ABDOMEN

For the mantis abdomen, the top was made of cardboard for rigidity, and a fiberfill stuffed pillow made of felt was attached to the under side. Emily and Zoe first cut out the shape of the abdomen from cardboard, then used the negative space in the cardboard as a template for the pillow.

9-Abdomen-Blank_Cardboard-cut-out-used-for-upper-form-of-abdomen_Hot-glue_Green-felt
The cardboard abdomen piece was creased down the center and covered with green felt with the help of hot glue. The leaf-like pattern was laid with a thin continuous bead of hot glue. The pillow they made was then glued to the bottom of the cardboard abdomen piece and the legs were attached. At this point it’s already looking really good, but Emily and Zoe continued, adding more details to the costume.

10-Abdomen-with_legs attached_Carboard-under-felt_top-side_&_felt-pillow_with-doll_fiber_fill_underpillow_Legs-made_same_as-forearms-with-gift-wrap-tubes

DETAILS

They hot glued green twine to the pillow side of the abdomen to give appearance of segmentation. Then they added a duct tape to the tip of abdomen’s underside, in a darker green.

10a-Segmented_Leg-detail

And while the top of the abdomen assembly is left open, this part of the costume remains unseen when Zoe wears it. You can get a good idea of how the legs were attached from the photo.

11-Underside_of_abdomen_cardboard&felt&hot-glue_Fiber-fill-felt pillow, using-cutout-stencil-as_template0segments_done_with_green-twine_HOT-GLUE-GOODlol

ATTACHING THE ABDOMEN

The whole abdomen assembly gets clipped onto the back of Zoe’s trousers, with extra support from a pair of suspenders. The suspenders are hidden by a warm sweater. The segments on the legs look good hanging to either side of the abdomen, and the leaf-like pattern on rigid upper surface of abdomen shows up nicely.

12-Abdomen2-clipped-on-to-rainbow-suspenders_On-the-night-suspenders-over-the-shirt-and-green-sweat-shirt_cold-in-colorado

STRIKE A POSE

13-Abdomen_Clipped-on-to-rainbow-suspenders-different-angle.

Demonstrating her finished mantis costume, Zoe struck this battle-ready (and candy-ready) stance.

14-Demo-Mantis-kitted-out_iQue-Furibundo!