Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

cz webbanner a askcraft Ask CRAFT: Replacing a Peacoats Lining

If you have a question for Ask CRAFT, shoot me an email at [email protected], or drop us a note on Twitter! We’d love to answer your crafty questions on any topic: technique, projects, crafty culture, or anything else! Each week the answers are here; include your name, where you’re from, and your website or blog if you have one!


peacoatlining1 Ask CRAFT: Replacing a Peacoats Lining

Lauren Venell writes in:

I have a wool peacoat that has held up perfectly on the outside, but the lining is literally in shreds. How can I replace the lining in time for winter without having to sew the whole thing in by hand? I cannot for the life of me figure out how the lining was sewn in by machine without stitches showing on the outside of the coat.

Coat linings are sewn in with the coat entirely inside-out. Just like a plush toy, a small opening is left somewhere so that it can be turned right side out, then the hole is hand sewn shut. This hole is usually somewhere along the bottom edge of the lining. Open it up with a seam ripper and reverse the entire thing. You’ll then see that the lining is sewn by machine to the outer layers of the coat. Use your seam ripper again to free the old lining, and even use it to construct a pattern for the new lining. Best of luck to you! As you can see from these pictures, I’m facing the exact same problem with my vintage peacoat.

peacoatlining2.JPG

peacoatlining3.JPG

peacoatlining4.JPG

becky stern headshot Ask CRAFT: Replacing a Peacoats Lining

Becky Stern

Becky Stern is director of wearable electronics at Adafruit Industries. Her personal site: sternlab.org


Related
blog comments powered by Disqus

Related Supplies at Maker Shed

Follow

Get every new post delivered to your Inbox.

Join 26,581 other followers