Flashback: Kokedama String Garden

Craft & Design Gardening
Flashback: Kokedama String Garden

CZ_WebBanner_A_Flashback.gif

By Brookelynn Morris

The first time I saw a kokedama string garden was right here, on Craftzine. Being a bonsai and ikebana enthusiast, I was captivated by yet another amazingly beautiful Japanese gardening method. I’ve hung my kokedama outdoors, where it sways a bit in the breeze, and I couldn’t love it more.
craftzine_string_garden_09.jpg
The steps are simple, with the most important aspect being the mixture of clay and soil. Try to achieve a blend of mud that clings together well. When encasing the plant, you will feel a bit like a sculptor, and in essence, you are sculpting the earth into something fairly impossible — a perfectly round hanging garden.


craftzine_string_garden_01.jpg

Materials

Small plant
Heavy clay mud, or bonsai soil
Potting soil
Moss
Twine

Directions

craftzine_string_garden_02.jpg
Step 1: Mix a few generous handfuls of clay with an equal amount of potting soil.
craftzine_string_garden_03.jpg
craftzine_string_garden_04.jpg
Step 2: Pull your plant from it’s container. To trim the roots, tug at them gently, breaking them apart, without breaking them off. Rinse as much of the growing media from the roots as you can.
craftzine_string_garden_05.jpg
Step 3: Hold the plant with one hand, and with the other, pat the clay mixture all around the roots. I started at the sides, worked to the top, then pressed the clay into the bottom of the plant last. Mold the clay into a round ball, making sure that the mud is against the base of the leaves.
craftzine_string_garden_06.jpg
Step 4: Firmly press moss all over the clay ball. The soft moss should stick right to the mud.
craftzine_string_garden_08.jpg
Step 5: Cut at least 3 yards of twine. Lay the moss-covered plant onto the center of the twine, then wrap and twist, wrap and twist, wrap and twist until the entire garden is bound.
craftzine_string_garden_09.jpg
Step 6: To finish the wrapping, draw one of the ends of twine up the side of the ball. Weave it over and under the wrapped twine, knotting as you go. Then repeat with the other end of string, on the opposite side of the ball. Getting a nice balance is crucial, especially with an upright growing flower.
craftzine_string_garden_10.jpg
Step 7: Hang the kokedama where the conditions are suited to the plant’s needs. To water it, hold a container of water up to the wrapped ball to submerge the roots. Because the plant is not in a solid vessel, it will require waterings that are a bit more frequent than other plants in your garden.

3 thoughts on “Flashback: Kokedama String Garden

  1. Bring on Spring with a Living Succulent Wreath - Make: | Make: says:

    […] to check out this step-by-step tutorial for building your own raised garden bed and this lovely kokedama string garden project right here on […]

  2. Bring on Spring with a Living Succulent Wreath - MyFeedly.info says:

    […] to check out this step-by-step tutorial for building your own raised garden bed and this lovely kokedama string garden project right here on […]

  3. DECORA TU BODA CON KOKEDAMAS. | youandmeproject.es says:

    […] Visto aquí  […]

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

Haley Pierson-Cox from Red-Handled Scissors is a maker of crafts, a lover of cats, an avid swearing enthusiast, a cross-stitch book author, and a general purveyor of quirk. She's also sometimes an irritable cartoon named Tiny Cranky Haley. https://www.redhandledscissors.com

View more articles by Haley Pierson-Cox

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK