Flashback: Battle Chic DIY Chainmail

Workshop

CZ_WebBanner_A_Flashback.gif
chainmail-opener.jpg
Learning the basics of how to make your own chainmail is one of those skills that can have far-reaching applications in your crafts. This week’s flashback comes from way back in 2006, from the pages of our very first issue of CRAFT magazine. Annalee Newitz provides you with the know-how you need to get started with chainmail. And for you collectors out there, you can still pick up an issue of this classic over in the Maker Shed.
Battle Chic
Craft a wardrobe of medieval armor with DIY chainmail.
By Annalee Newitz

Henrik Olsgaard, aka Henrik of Havn, has been proclaimed King of the West six times. Obviously the guy is deft with a sword — you don’t get to be King in the Society for Creative Anachronism (SCA) without winning several bouts in the annual Crown Tournament. But his triumph is also testimony to his skill at making chainmail. Henrik has been fashioning chainmail of every description for the past four decades — from beautiful, sterling silver belts to a 50-pound battle hauberk (a knee-length shirt).
And now, I’m going to teach you what he taught me: how to make your own chainmail. With just a few basic patterns, you’ll have all the knowledge you need to fashion a helmet, shirt, belt, coin purse, and even a full hauberk.

Materials

Needlenose pliers
1″ diameter dowel
which you can hold in place with a rack or some other device
Make rings yourself using:
3/8″-diameter rod
Coat hangers (15)
or several feet of stripped aluminum wire or junk wire that you want to recycle
Hammer
Rod clamp that fits the 2″ rod
Small wire snipper

Or you can buy pre-made steel rings from chainmail.com.

Directions

Step 1: Buy or make your own rings.
For this project, we’ll create square and triangular swatches of chainmail, which are the basic building blocks for anything larger. There are two ways to go about this: you can make your own rings from stripped aluminum electrical wire, store-bought wire, or coat hangers, or you can buy the rings ready-made from sources like chainmail.com.
chainmail-figA.jpg
If you’d like to create your own rings, begin with the wire of your choice. For lighter pieces, you might try aluminum wire. Most mail makers prefer steel. To create the rings, wind your wire around a rod, then flatten the end with a hammer and hold it in place with a small rod clamp.
Caution: As you wind, you’re creating a high-tension spring — if you slip, the wire can snap back at you quickly.
chainmail-figB.jpg
Next, you’ll want to slip the coil off your rod and use a wire snipper to cut the rings. Be sure, as you’re cutting, that you are creating full rings and not leaving gaps.
Shortcut: Some armor makers cut their rings out of door springs.
Step 2: Knit your rings into chainmail swatches.
chainmail-figD.jpg
Once you have a few hundred rings, you’re ready to start knitting (for reference, a full hauberk takes about 10,200 rings). To do this, you’ll start by creating a small length of chain using 2 needlenose pliers to open and close each ring — this is the knitting part.
chainmail-figC.jpg
When you pull the rings open, be sure to open them sideways.
chainmail-figE.jpg
Your first string should be twice as long as the first row in the swatch you’ll be making. For this exercise, we chose to make the string 20 rings long, for a 10-ring row.
chainmail-figG.jpg
Once you have your string, you’ll want to thread it onto a thin rod so that it hangs properly as you add length. Henrik’s knitting rig is typical — he’s got 2 uprights with holes in them to place the rod into. But you can use literally anything that will hold your rod in place as you work, including simply taping it to 2 boxes.
To create the first 2 rows, you should thread every other ring, thus creating the kind of design shown in the top picture.
This is the beginning of the “four in one” pattern you’ll use for the rest of your swatch. When you make your next row, you’ll want each ring to link to 2 others. Each ring on the second row should have 4 rings in it.
If you want to make a square, every other row should begin with a ring that only holds one ring from the row above, as described thus far. But for a triangle, you want to shrink each row by 2. So you’ll start each row with a ring that connects 2 from the row above. Keep knitting until you have a square or triangle of the size you wish.
Step 3: Connect swatches to make armor (or anything metallic!).
chainmail-figH.jpg
Now that you’re practiced, you’re ready to pick a pattern and start making something other than a square or triangular swatch.
chainmail-figF.jpg
The image above shows how triangles and squares can fit together to create other shapes. There are several sites that offer patterns you can choose from, including theringlord.com, which sells armor supplies and pattern books and hosts a community forum, as does artofchainmail.com.
Henrik says the best part of chainmail making is getting a chance to wear and use it with friends. “I don’t like getting in front of paying audiences to do this,” he explains. “I like to share what I’ve done at SCA tournaments and places where everybody participates in the event.” And that’s where I find him, in full armor, a few weeks after our lesson.
About the Author:
Annalee Newitz (techsploitation.com) writes about geek culture in San Francisco. Her favorite dragon is black, and her favorite accessory is a bag of holding.

4 thoughts on “Flashback: Battle Chic DIY Chainmail

  1. melee says:

    Well, that’s certainly how to make cosmetic chain mail. Wouldn’t work as actual armor, in which the rings are riveted to keep them from pulling apart. (And in really good chain mail, you also flatten the rings.)
    Anyway, I’m sure it’s fine for SCA, but if you go back in time, don’t trust this technique on any medieval battlefields.

  2. cyberpaddy66 says:

    I’m sure if your time travel machine works well enough to take you back in time to a real battlefield you could aquire some real chain mail for the purpose it was designed for (*rolls eyes*)
    I have been a battle re-enactor for well over 20 years and this type of chain mail if made out of steel wire is more than adequate for the task of protecting yourself on the modern battle re-enactment field. My own personal chainmail has withstood the rigours of the modaern day fight arena where real (but blunted) swords are used.
    This is a very good tutorial on how to make chain mail and I beleive your negative comments are not beneficial to this type of community and I applaud Annalee Newitz for taking the time to post this blog.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

I'm a word nerd who loves to geek out on how emerging technology affects the lexicon. I was an editor on the first 40 volumes of MAKE, and I love shining light on the incredible makers in our community. In particular, covering art is my passion — after all, art is the first thing most of us ever made. When not fawning over perfect word choices, I can be found on the nearest mountain, looking for untouched powder fields and ideal alpine lakes.

Contact me at snowgoli@gmail.com or via @snowgoli.

View more articles by Goli Mohammadi

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK