How-To: Build a Cardboard Cat Rocket

Craft & Design

CZ_QuirkyCrafts.gif
Cat_Rocket_Finished1.jpg
By Haley Pierson-Cox
No matter how many fancy cat toys they have, there is nothing in this world that makes my cats happier than a good old fashioned cardboard box. So, taking a cue from them, I designed a cat tree that turns four regular cardboard boxes into a flashy two-story cat rocket, complete with carpet for scratching and a porthole to jumping into and spying out of. And, wouldn’t you know, it worked! I don’t think I’ve ever seen my cats more excited.
My husband has a soft spot for the Tintin books from his childhood, so we painted our rocket with the trademark red and white checkerboard design that he remembers so fondly. You don’t have to follow our lead, though. Feel free to paint your cat rocket to match any rocket ship you’d like!

Materials

4 cardboard boxes, 20″ x 20″ x 20″ square single-walled cartons
2 carpet squares, 20″ x 20″
68 #10 washers
34 #10 nuts
18 1/2″ #10 screws
16 3/8″ #10 screws

Screwdriver, optional
Wrench, optional
Tape measure
Box cutter
Long ruler or yardstick
Pencil or marker
Thumb tack
String
Drill or awl
Duct tape
Hot glue gun
Bone folder

Paint, in your favorite colors – I used Crayola Washable Kid’s Paint
Paint brushes/sponges
Note: I’ve chosen to attach the pieces of my cat rocket with screws and nuts rather than glue. I think hardware looks better than glue, holds more securely for a more permanent feel, and avoids adding any unnecessary chemicals that cats could pull off and chew. It also withstands actual cat play nicely.

Directions

cat_rocket_step1a.jpg
cat_rocket_step1b.jpg

Make the bottom of the rocket.


Step 1: Select the box that you will use for the bottom of the rocket and lay it flat. Find and mark the center of one side by drawing two diagonal lines from corner to corner, and making a dot where the lines cross. (Make sure you do this in pencil so you can erase the lines later.)
cat_rocket_step2a.jpg
cat_rocket_step2b.jpg
Step 2: You will create a 12″ curved entrance on the side you just marked. To do this, you’ll need to make a compass: Tie a piece of string around a pencil (as close as possible to the lead), and then tie a knot in the string 6″ away from the pencil. Insert a thumbtack into the knot, and then stick the thumbtack into the center mark that you made in Step 1.
Draw a 12″ circle, then draw two straight lines down to the bottom of the box on either side of the circle. Finally, draw a line along the bottom edge of the box to connect the two lines you just drew across the bottom.
cat_rocket_step3.jpg
Step 3: Cut out this entrance using a box cutter. Make sure you put a cutting mat or extra layer of cardboard inside the box before cutting so you don’t cut through the other side of the box.
cat_rocket_step4.jpg
Step 4: To keep your rocket structurally sound, you’ll need to line the bottom box with a second box so the walls are double-layered on three sides. To make the liner, lay the second box flat and cut off the top and bottom flaps, then remove one of the four sides.
Set the extra pieces aside – you’ll need them later.
cat_rocket_step5.jpg
Step 5: Set up the bottom box so it is a fully-opened cube. (Don’t tape or glue it in this shape – we’ll do that later.) Insert the liner into the bottom box, taking care that the corners don’t catch along the sides and rip. Place the open space on the side with the entrance. The three non-entrance sides will now be lined.
cat_rocket_step6b.jpg
cat_rocket_step6c.jpg
Step 6: Facing the entrance, you will now cut a square in the top of the box, in the back left corner. (This is how the cats will get from the bottom level to the second level of the finished rocket.) Draw an 8″ x 8″ square on the two top flaps in this location, placing it 2″ from each side of the box. Cut through both flaps to create a square opening in the top of the box.
Set aside the bottom level.
cat_rocket_step7b.jpg

Make the second level of the rocket.


Step 7: Take the third box and lay it flat. Create a 10″ porthole on one side by finding the center and drawing a circle with a string compass like you did in Steps 1 and 2. (Your string length will be 5″ this time.) Cut out the porthole with a box cutter.
cat_rocket_step8.jpg
Step 8: Next, you will cut a square hole in the bottom of the second level that lines up with the square hole you cut in Step 6.
To do this, set up the second level box so it is a fully opened cube. (Again, don’t tape or glue it in this shape yet.) Place it on top of the bottom level box, lining up the porthole so that it faces in the opposite direction from the entrance on the bottom level. (The porthole will be on the front of the finished rocket and the entrance will be in the back.)
Sticking your head into the entrance on the bottom level, trace the square you cut in Step 6 onto the flaps of the box above. Cut this square out of the two flaps of the second-level box. The openings on the top and bottom levels should now line up when the boxes are stacked.
cat_rocket_step9.jpg
Step 9: We have carpet squares to place inside these boxes, but we’ll need to cut that same 8″ square in one of them, so the cats can get through! To do this, turn one of the carpet squares over and set the second-level box on top. Trace the square on the back side of the carpet, and cut it out with the box cutter.
cat_rocket_step10a.jpg
cat_rocket_step10b.jpg

Make the top cone.


Step 10: Now, we’ll make the pointed top of the rocket. Take the third box and mark the center point on the top edge on all four sides. Starting at this point, draw a diagonal line to the bottom corner on each side, then draw a horizontal line along the bottom, creating a triangle. The four triangles you make will be the sides of your top cone.
Before cutting them out, add a tab to each triangle by drawing a parallel line 2″ out from left side of all four triangles. Shorten the tab on the top by measuring 5″ down and drawing a perpendicular line to meet the side of the triangle. Do the same on the bottom, measuring 4″ up and drawing a perpendicular line to meet the side of the triangle. Repeat for all four pieces, then cut out your tabbed triangles.
Note: all four tabs should be on the same side.
cat_rocket_step11a.jpg
cat_rocket_step11b.jpg
Step 11: With a bone folder, score and fold the tabs on all of the triangles so the cone will bend properly when put together. Make sure to score only the side of the tab that will be on the inside of the cone.
cat_rocket_step12.jpg
Step 12: Before you assemble the cone, you’ll need to prepare the second-level box for the cone to be attached to it. Lay the second-level box flat, and then trim the top flaps so they’re just 2 1/2″ tall. You will attach the cone pieces to these newly-shortened flaps.
cat_rocket_step13a.jpg
cat_rocket_step13b.jpg
cat_rocket_step13c.jpg
Step 13: Now, let’s build the top cone. Using one of the tabbed triangles as a template, line up the bottom of the triangle with the bottom edge of the flap and trace the angle on each side. To make sure the top flap isn’t visible when you attach the cone, make it slightly smaller by moving the line you just drew in by 1/4″, still using the triangle as a template for tracing. Cut flap to size using the new lines. Repeat on all 4 sides.
cat_rocket_step14.jpg
Step 14: It’s time to build the cone. On the top and bottom of each triangle tab from step 10, mark your hole locations by measuring 1″ toward the center of the tab and 1″ up from the top and bottom edges. Each tab will have one centered hole at the top and at the bottom. Mark all four triangle tabs.
cat_rocket_step15a.jpg
cat_rocket_step15b.jpg
Step 15: To attach the triangles, line the tabbed edge of the first triangle up with the non-tabbed edge of the second triangle. Using a drill or an awl, make a hole through both the tab and the second triangle as marked in step 14. Using a 3/8″ screw and a nut, connect the triangles through each hole, placing a washer on both the front and back sides of the screw. Once the first two triangles are connected, add the third triangle in the same way.
Note: I hand-tightened all of the screws and nuts in this project, but you can use a screwdriver and wrench if you prefer.
cat_rocket_step16.jpg
Step 16: To attach the fourth triangle, you will need to line up and drill/punch holes in both the tabbed and non-tabbed sides before connecting it to both the third and first triangles. Once you connect the fourth triangle to each side, your cone will be fully assembled.
Set the cone aside – it will be added last.
cat_rocket_step17.jpg

Add the fins.


Step 17: Grab three of the flaps you set aside when making the liner in Step 4. Cut each flap in half diagonally, creating 6 triangles.
cat_rocket_step18.jpg
Step 18: On each long, non-diagonal side, measure in 1″ and use a bone folder to score and fold a tab. You will be gluing two triangles together to make each fin, so make sure the tabs in each set fold out in opposite directions.
cat_rocket_step19.jpg
Step 19: Glue the triangles together to make the fins, then cut the extra length off of the top of each tab.
cat_rocket_step20.jpg
Step 20: Mark the hole location on the tabs of each fin by measuring in 1/2″ toward the center of the tab, then 2″ down from both the top and bottom edges.
cat_rocket_step21.jpg
Step 21: Lay the assembled bottom box on its side. Find the center of the top edge on one side, then draw a vertical line down the center from top to bottom. Repeat for each of the three sides without the entrance.
cat_rocket_step22b.jpg
Step 22: Line a fin up on this center line so that the bottom of the fin lines up with the bottom edge of the box. Using a drill or awl, make a hole for each screw through the fin tab, box, and lining. Make all the holes on all sides before connecting the fins.
Once all holes are made, attach the fins to all three sides using 1/2″ screws and nuts, placing washers in both the front and the back of each screw. To avoid unnecessary cat-poking, the head of each screw should face the inside of the cat rocket. The fit might be a little tight, so you may need a friend to help push the layers together.
cat_rocket_step23.jpg

Attach the second level to the bottom level.


Step 23: Using duct tape, secure the top and bottom flaps of the bottom-level box in place. (Feel free to use hot glue on the bottom flaps for added durability.) Do the same for the bottom flaps on the second-level box.
cat_rocket_step24.jpg
Step 24: Place the second level on top of the bottom level, lining up the square holes on the inside and the edges of the boxes on the outside. As pictured above, drill or punch holes through the top and bottom flaps (four layers). Connect the top and bottom levels with 1/2″ screws and nuts, placing washers in both the front and back of each screw. Place the head of each screw in the bottom-level box, with the nut side facing up into the second-level box. (You will later cover this with a carpet square, so don’t worry about cat-poking.)
Again, it may be a tight fit, so you may want to have a friend around to help push the layers together.
cat_rocket_step25.jpg

Attach the cone to the top.


Step 25: Make sure those trimmed flaps on the top of the second-level box are folded to the inside, and then center the cone on top of the rocket. On each side, punch centered holes through both the bottom of the cone and the top flap. Reaching through the porthole for access, connect the cone to the second level on all sides with 3/8″ screws and nuts, using washers on both the front and the back sides of the screws. (I placed the screw heads to the outside on these.) Attach the front side first, followed by the back, then finishing with the sides.
cat_rocket_step26b.jpg

Decorate and paint.


Step 26: Take two more of the leftover flaps from Step 4 and lay them down side by side, holding them together with a little duct tape. Trace the circle that you cut out from the porthole in Step 7 onto the flaps, centering the circle over the crack where the flaps are attached. Using the string compass method, draw another circle around the one you just traced that is 2″ larger. Cut out the ring and attach it to the porthole using 3/8″ screws and nuts with a washer on each side. (Place the heads of the screws on the outside of the box this time, as shown above.) Add extra washers to the bottom of each screw as needed, so that there’s no extra screw length sticking out of each nut.
Note: I only used 4 screws to hold my porthole frame in place, but you can use more for decoration.
Cat_Rocket_Finished2.jpg
Step 27: Paint your rocket in any way that suits you. Once dry, insert your carpet squares into the top and bottom levels.
If the paint warps the cardboard a bit while it’s drying, remember that you can always stick things back in place later with a little hot glue.
You’re done! Sit back and let the cat games begin.

About the Author:
Haley_Pierson-Cox_Author_Photo.jpg
Haley Pierson-Cox is a Brooklyn-based craft writer who loves granny glasses and loathes extraneous apostrophes. She blogs about crafts, cats, domestic bliss, and DIY goodness at The Zen of Making.

94 thoughts on “How-To: Build a Cardboard Cat Rocket

  1. Jon says:

    Could you use hot glue instead of nuts & bolts to hold the pieces together or would it not be stong enough?

  2. thezenofmaking says:

    Hi, Jon! I didn’t try making one with just hot glue, but I don’t think it would be strong enough in the long run, especially where the cone is attached and where the two floors meet. If you don’t want to use nuts and bolts, I think zip ties might work just as well. I hope that helps!
    Haley @craft

  3. Karina Ohep says:

    Beautiful! Unfortunately, the youngest of my cats is a gnawer… She can go through cardboard, plastic, cables (yeah, scary…) and cloth, so I wouldn’t consider doing such a big project to have her turn it into mush eventually. We have made her disposable cardboard playhouses by just cutting windows and doors into a box and she enjoys that a lot, until it becomes ugly and then we send it to the recycling bin ;-). Nice tutorial.

  4. ecig 400 says:

    This might be this blog’s best piece of writing yet.

  5. Education services says:

    What a well written blog post!!!

  6. El Tarot says:

    This post couldn’t be more factual!

  7. casual relationship says:

    That is very forthcoming writing..

  8. ibcbet says:

    What an all ’round amazing post…

  9. invizible detector,filmeonline,photosop,photosop online says:

    Incredibly well written piece!!!

  10. commercial property insurance says:

    You couldn’t be more precise!!!

  11. Dimyanshan says:

    привет

  12. funny videos says:

    I dont disagree with this blog!!

  13. cigarettes electroniques says:

    That was intriguing post!!

  14. montclair jassen heren sale says:

    Thats an all ’round amazing article…

  15. backlinks says:

    I fully agree completely..

  16. insedlime says:

    This article is related to website programming is actually good in favor of me as I am web programmer. Thanks for sharing keep it up.

  17. hebergement internet says:

    I am in accordance completely.

  18. online Nike schoenen says:

    Thank god some bloggers can write. Thank you for this blog…

  19. critical thinking says:

    This surely makes great sense!!

  20. cigars says:

    You’re exactly correct on this blog post..

  21. how to start a proposal says:

    I do not disagree with this post.

  22. cigarette électronique rechargeable says:

    I couldnt agree with you more…

  23. Nike Air Max online bestellen says:

    Cracking piece!!!

  24. Popular Destinations says:

    This surely makes perfect sense to me!

  25. Natashafex says:

    Quero baixar xrumer 7.0.10 ??
    Dê-me por favor URL!
    É o melhor programa para massa postagem em fóruns ! XRumer pode quebrar a maioria dos tipos de captchas !

  26. Jess.Skyclanna says:

    Thank you.

  27. cruise line jobs west palm says:

    I could not think you are more right!!!

  28. Jeff Booher says:

    You are unquestionably right on this blog..

  29. cigarette électronique jetable says:

    I do not disagree with this article!

  30. jeux de tir sniper says:

    Your unquestionably correct with this one..

  31. anvelope says:

    Wonderful read!

  32. russia package tour says:

    I am totally delighted with incredibly blog greatly that saved me! Thank you “New discoveries in science will continue to create a thousand new frontiers for those who still would adventure.” – Herbert Hoover

  33. knoneeRolikem says:

    I do not work statsionarnik how to fix ?
    Doctors who advise Personal Computer )))?

  34. Want to make extra cash? Take a look at us. says:

    That was a really incredible piece…

  35. Nike Air Max acg says:

    I dont disagree with this post!

  36. bystolic says:

    Overall, From Types old if of. Parallel qualified the can. Panic thus has Loss find. Ovarian Of can of use vision the serious be at high.

  37. buy bystolic without prescription says:

    simply most to body remedies with. fibroids weights, makes well is.

  38. Br ian Flores says:

    Any news about A defector’s strange disappearance?

  39. buy bystolic says:

    Let type normal medicine found of. Good straight time that cost it helps to.

  40. buy bystolic without prescription says:

    Menopause and to it has in. Following leads you removed influences production infection. Cut can piece menopausal can infection. These is itching and.

  41. Caleb Davis says:

    Negative news – Syria’s ‘mutilation mystery’ deepens…

  42. property insurance says:

    Thank god some bloggers can write. Thank you for this blog post!!

  43. otheddydrer says:

    Ремонт компьютера в Жуковский
    [url=rkservice.ru]компьютерная помощь выхино[/url]

  44. We Bring Innovation to providing Electronic Equipment. says:

    I couldnt think you are more right.

  45. buy bystolic online says:

    There Remedies also are matrix. Overworking will bad heart it to cleaning. Your there are women a.

  46. panduan belajar gitar says:

    Great article..

  47. janitorialservice, janitorialserviceirvine. janitorialservicelosangeles says:

    Could be this blog’s greatest post around…

  48. tarot online says:

    This surely makes great sense to anyone..

  49. metal commodities says:

    That was some communicative piece…

  50. iç çamaşır says:

    Tremendous blog…

  51. Fud Crypters says:

    You’re unquestionably correct on this piece!!!

  52. officecleaningserviceslosangeles. commercialcleaningcompanies, commercialcleaninglosangeles, janitor says:

    I couldn’t think you are more right..

  53. mahjong fortuna gratuit says:

    I’m gone to tell my little brother, that he should also visit this weblog on regular basis to get updated from hottest news.

  54. my ed account says:

    That was a truly great blog!

  55. nursing degrees says:

    Extraordinarily well written writing.

  56. buy gold says:

    You couldn’t be more on the level!!

  57. joliegratuit says:

    Incredibly well written blog post!!

  58. kopi indonesia says:

    Terrific piece of writing!!!

  59. china christmas tree says:

    You’r quite correct with this blog post…

  60. Olga F. Honea says:

    wonderful post.Never knew this, regards for letting me know.

  61. paulbeartil says:

    hi heres the site just say paul put you onto them
    p beartil

  62. Quiteria Guardado Baeza says:

    I really appreciate what you post. You have a new subscriber now.

  63. handmade glass says:

    I couldn’t think you are more right!!

  64. المرأه says:

    This post couldn’t be more correct!

  65. Online slots bonus says:

    Absolutely, agree. Amen. I am truly sick and tired of all the whining here and in other similar blogs…

  66. Menelom says:

    Yes … the design is clearly needed to be changed :)
    What would be brighter , nebudu (

  67. BeawBevealafe says:

    Do you like handbags? In this article there is a greatest Coach, Gucci, Prada as well as other custom bags regarding 2012. Styles are always transforming and 2012 is no different. This year the very best designers have got produce some truly awesome stuff. Many of the designers are integrating cutting edge engineering with the most recent the latest fashions to produce absolutely amazing handbags.

  68. BeawBevealafe says:

    Is it really a tote through Chloe? With the actual simple design and inharmonious colors combination, I nearly feel my own eyes.
    This ndy?Satchel within eucalyptus leather-based will be kind of dull to appear at, but thanks to in which zippered gusset which shows the darker-hued panel since it tends to make this kind of carrier just a little interesting. It furthermore has a double best addresses together with gold rectangular link attachments, a top zero closure, plus some accents around the side.

  69. promotion web says:

    You will have to consider aspect inside an important challenge for one from all of the most beneficial blog sites for all of the net. I actually can suggest http://www.catsparella.com !

  70. Clen says:

    Congratulations on having one of the most sophisticated blogs I’ve came across in some time! Its just incredible how much you can take away from something simply because of how visually beautiful it is. Youve put together a great blog space great graphics, videos, layout. http://www.catsparella.com is definitely a must-see blog!

  71. Appliance repair Pasadena says:

    I needed to write down a brief notice in buy to thanks for all the fantastic suggestions you’re placing at http://www.catsparella.com. My prolonged internet lookup has at the finish of the day been recognized with reliable details and techniques to trade with my co-workers. I would assert that several of us readers really are seriously lucky to live in a important location with quite several excellent individuals with insightful pointers.

  72. saulieef says:

    Stuff
    Stuff
    Stuff
    Stuff
    Stuff
    Stuff

  73. Laubp says:

    Hi there I am from Australia, this time I am viewing this cooking related video at this website, I am actually cheerful and learning more from it. Thanks for sharing.

  74. cheapest xenical prescription pills says:

    It is remarkable, very useful piece

  75. The Death Clock says:

    Hello there I am so grateful I found your weblog, I really found you by accident, while I was looking on Digg for something else, Nonetheless I am here now and would just like to say thanks a lot for a remarkable post and a all round thrilling blog (I also love the theme/design), I donít have time to read through it all at the minute but I have bookmarked it and also added your RSS feeds, so when I have time I will be back to read much more, Please do keep up the fantastic work

  76. drivers in St.Petersburg Russia says:

    Hope to receive some assistance from http://www.catsparella.com if I will have any questions.

  77. escorts Dubai says:

    Your blog post on http://www.catsparella.com offers the same submit as another article author but i much like your far better.

  78. proviron says:

    But i want to tell that this http://www.catsparella.com is extremely helpful, Thanks for taking your time to write this.

  79. Make Your Own Pet Toys on the Cheap | Save Community says:

    […] offers plenty of places to perch, survey, and pounce. Ambitious crafters can also make this amazing cat rocket ship replete with indoor carpeting. Cats also love to climb to the greatest heights around the home, so […]

  80. Как сделать космическую ракету | Site1 says:

    […] Описание работы […]

  81. Charity Penney says:

    I love this rocket! I plan on making it for my cat tomorrow. Is this a difficult project?

  82. 5 Must Try DIY’s for Dog Lovers | Sweet. Dog. Life. says:

    […] #1. Cardboard Cat Rocket (Makezine, instructions here) […]

  83. 6 Incredible DIY Cat Furniture Projects - Odd Jobs says:

    […] can find detailed step-by-step instruction for her cat rocket here at Make […]

  84. Blue Coaster33 says:

    Healing’s Dragon

    to locate concerns to enhance my website!I suppose its okay to make use of some within your principles!!

  85. Learn More says:

    The Absent Game

    Involving me and my husband we have owned far more MP3 players over the years than I can count, which includes Sansas, iRivers, iPods (typical & touch), the Ibiza Rhapsody, etc. But, the last few several years I’ve settled down to one line of players.

  86. free movie downloads says:

    Souls in the Waves

    Very good Morning, I just stopped in to visit your web site and considered I’d say I enjoyed myself.

  87. watch movies online free says:

    The Silent Shard

    This can almost certainly be quite practical for a few of one’s positions I plan to do not only with my blogging site but

  88. water ionizer says:

    The Slave of the Husband

    In search of in advance to learning excess from you afterward!…

  89. alkaline says:

    Healing’s Dragon

    to uncover difficulties to boost my internet site!I suppose its okay to produce utilization of a handful of within your ideas!!

  90. alkaline water says:

    Thorn of Girl

    Excellent info can be found on this net website.

  91. kangen says:

    Souls in the Waves

    Superior Early morning, I just stopped in to go to your site and believed I’d say I experienced myself.

  92. How to use Viber in UAE 2015 says:

    Whispering Misty

    So sorry you can pass up the workshop!

  93. Google says:

    Google

    We came across a cool website that you simply may love. Take a look when you want.

  94. 20 asombrosos proyectos DIY pensados para el cuidado de nuestros gatos - says:

    […] Fuente […]

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK