Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Halloween Crafts
How-To: Make a Fake Beard
By Erin Dollar


Not sure what to be for Halloween? Take the crafty mustache trend to the next level with this project on how to make a fake beard. An easy quick-sew project that will turn you into a lumberjack or any character you wish!


Makeabeard Step1A

Materials

Two 8″×12″ pieces craft felt, any color
Thread in matching color
Needle
or sewing machine
Pins
Scissors
1 yard grosgrain ribbon, cut in half
18″ each
Printer and paper to create template
Download the beard template (jpg).

Directions

Makeabeard Step1B
Step 1: Gather materials (I neglected to show the ribbon in the materials photo at top, so don’t forget it!). Print out the template at full size, cut out, and pin to both pieces of felt.
Makeabeard Step2
Step 2: Cut out the felt pieces using the template as a guide, making 2 of each. Pin each like piece together. Set the moustache aside until Step 5.
Makeabeard Step3
Step 3: Attach the ribbon ties to the upper right and left corners of the felt beard, sandwiching the ribbon between the felt as shown. You can do this by hand sewing it between the 2 layers of the beard, or using a machine to sew an X pattern over the ribbon and the back layer of felt.
Makeabeard Step4A
Makeabeard Step4B
Step 4: Sew along the outer edge of the larger felt pieces, leaving about 1/8″ along the outside. This can be hand sewn, or sewn on a machine.
Makeabeard Step5A
Makeabeard Step5B
Step 5: Take the pins out of the larger beard pieces, and pin the moustache pieces onto the beard, making sure to sandwich the pokey-looking flaps on the top of the beard between each side of the moustache. Try to keep the moustache centered between the 2 top flaps. With the moustache pinned in place, sew along the edge of the moustache, taking care to sew securely through all layers where the 2 panels meet. This is a little tricky to do on a sewing machine, but certainly possible. Be careful not to sew your fingers!
Makeabeard Step6A
Step 6: Your beard is all finished! Check for stray threads, trim messy edges, and try on your masterpiece. Add eye patches, gnome hats, or villainous looking tattoos as needed to complete your look.
About the Author:
Makeabeard Aboutme
Erin Dollar lives in Portland, land of hipsters with beards and lumberjacks with beards. She is the one-woman beard factory behind I Made You A Beard , but she sometimes finds a spare moment to screenprint or bake cookies.


Related

Comments

  1. Lane says:

    i tried to download the beard template and got a 404 not found error :(

  2. Anamaria says:

    Ack, me too. I have a Gimli in desperate need of a beard over here!

  3. Natalie Zee Drieu says:

    The jpg file should be working now!

  4. Kate Perry says:

    I saw this post, and I knew that this person must live in Portland, Oregon (I live there too). I was a cowboy last year for Halloween with a huge handlebar mustache that kept getting into my mouth. These beards and mustaches are an improvement. Now I must think of a costume for this year!

  5. THEKELBEL says:

    I’m completely in love with this tutorial yet….. I tried to print the template and it seems it’s cutting off the two sides of the beard…. meaning the template is incomplete. Otherwise it would be printing on 2 or 3 pages but it only prints 1 page just not the full template. I’m bummed

  6. Natalie Zee Drieu says:

    This template is what the author gave us and is correct. If you look at her image in the tutorial and the jpg in your browser you can see that you cut straight across the sides. It’s made to print on 8″ 1/2 X 11″ paper. I just printed it and it was fine.

  7. Jessica says:

    SO stinking AWESOME!! love love love it!

  8. megegreap says:

    Hello! Just want to say thank you for this interesting article! =) Peace, Joy.

  9. cheap valtrex says:

    Thanks for this marvelous post, I am glad I observed this web site on yahoo.

  10. JagcallFloutt says:

    You have some honest ideas here..

  11. Cuthbert says:

    Great internet site. A lot of handy info here. I am delivering it to a couple of buddies ans also sharing in delicious. And lastly, great sweat!

  12. computer supported cooperative work says:

    Once I originally commented I clicked the -Notify me when new feedback are added- checkbox and now each time a remark is added I get four emails with the same comment. Is there any manner you’ll be able to take away me from that service? Thanks!

  13. Nanette says:

    I tried this pattern. I opted for a single layer of felt, pointing the moustache downward and gluing it on with a hot glue gun, and using elastic instead of the ribbon to keep the beard on. It worked well.