Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

jersey_scarf_14.jpg
Back to school doesn’t have to mean back to school shopping. Instead, DIY! I love fashion trends, but I also hate having to keep up with them if it means spending money. Generally I choose classic-looking clothes and I try to limit my trendiness to a few select accessories. Luckily, one of the hottest scarf designs this season is ridiculously easy and fun to sew. I spent $1.20 on the elastic thread, and in 5 minutes I had stitched up my new favorite scarf out of some jersey I had lying around. I had a blast making it too!
jersey_scarf_11.jpg
If you are nervous about sewing with elastic, don’t be! It’s so easy. Don’t be concerned about making the lovely gathers, either. There is nothing to fear. This project is the perfect chance to sew crazy freeform swoops without worrying about anything at all.


jersey_scarf_01.jpg
Materials:
Jersey
Sewing machine
Elastic thread
General purpose thread
Scissors and/or rotary cutter and mat

jersey_scarf_02.jpg
Step 1: Cut a piece of jersey 6′ long and 10″ wide.
jersey_scarf_03.jpg
Step 2: When sewing with elastic thread, the elastic goes onto the bobbin, and the standard sewing thread is the top thread. The only trick is to hand-wind the bobbin. Load the bobbin with the elastic thread without stretching it. Do not pull on the thread as you wind it on to the bobbin.
jersey_scarf_05.jpg
After I loaded my first bobbin, I realized that I would likely need 2 bobbins full, so I went ahead and wound a second one up. Once you have filled the bobbin with the elastic, thread the machine as you normally would, with the general purpose thread at the top. Set the machine to sew a long straight stitch, and if you like, practice by running a scrap through.
jersey_scarf_07.jpg
jersey_scarf_19.jpg
Step 3: To create the gathered effects, all you have to do now is sew all over it! I started 2″ from the end, and stitched crazy swirls back and forth along the width of the scarf. I went from side to side, making asymmetrical “S” shapes. The hardest part was not going too fast and running off the edges. Go nuts and have fun — the more chaotic the better! The bottom of the scarf will have the elastic swoops, and the top will be the pretty gathers!


Related
blog comments powered by Disqus

Featured Products from the MakerShed

Follow

Get every new post delivered to your Inbox.

Join 25,885 other followers