How-To: Sew a Scissor Holder

Craft & Design Yarncraft

CRAFT: Make Space for Crafting
scissorholder_final1.jpg
I have quite the scissor collection. I used to keep them loosey goosey in a box, but after reaching in to grab a pair, and ending up almost loosing my hand, I decided to devise a new and more safe way to store them. I took a cue from simple knitting needle holders, and stitched up a quick roll-up holder. I used some sturdy printed canvas, and a lovely silk ribbon. This is a great project for using up scraps, and a fun way to organize your tools.


scissorholder_materials.jpg
Materials:
Your scissor collection
1 yard heavy cotton fabric
1 yard ribbon
Rotary cutter and mat
Sewing machine
Thread

Not shown: Straight pins
scissorholder_step1.jpg
Step 1: Fold the cotton fabric in half. Set your scissors out on the fabric. I lined up the screw of each pair, regardless of the handles or blade length. This way all the scissors will be centered on the holder. Cut out the fabric, being sure to cut through both sides.
scissorholder_step2.jpg
Step 2: Cut a strip of fabric 1″ wide, and 4″ longer than the lined up scissors. Center it over the scissors.
scissorholder_step3b.jpg
Step 3: Pin down the strip in-between each pair of scissors. Push the straight pins into the fabric, as close as you can to the sides of the scissors.
scissorholder_step4.jpg
Step 4: Set your sewing machine to the straight stitch. Sew along the three cut edges and the one folded edge of the fabric holder.
scissorholder_step5b.jpg
Step 5: Sew the strip down, along each line that you have pinned. I knew that I would have trouble sewing straight and even, so I purposefully made slightly uneven stitches. I sewed over the fabric strip three times where each pin was placed.
scissorholder_step5.jpg
Step 6: Cut all the thread ends from the holder. Also cut off the remaining edges of the strip.
scissorholder_step8.jpg
Step 7: Cut 2 pieces of ribbon, one 6″ long, and one 12″ long. Sew the short ribbon to the back of the holder, right against the edge.
scissorholder_step9.jpg
Step 8: Mark where the rolled up holder meets the edge with the short ribbon. Take the scissors out, and then sew the long ribbon to the back of the holder, where you have marked.
scissorholder_final1.jpg
Step 9: Now you can put all the scissors back and roll up the holder. Wrap the long ribbon around the bundle to secure it, and tie it closed. Volia!

6 thoughts on “How-To: Sew a Scissor Holder

  1. Anonymous says:

    Good idea but I’m speachless ..all those raw edges…. yikes!!!!

  2. RUTH says:

    And yikes again!! Couldn’t believe what I was seeing. And worse–in one of the first pictures sets a Baby Lock. Serge or zig-zag away!! Raw edges are a definete NO NO!!
    Otherwise, love your idea and I intend to make one for my pile of scissors ASAP!

  3. RUTH says:

    Oh, one other thing–heat seal the edges of any ribbon you use for this project, otherwise it will just constantly unravel.
    Heat seal can be done with a candle flame or the flame of a lighter. Be very careful using this technique.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK