Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

CZ_Wood.gif
elephantpuzzlefinal6.JPG
By Sonya Nimri
Anyone who’s ever taken on an ambitious home-improvement project knows what it’s like to have spare wood lying around – and to want nothing more than to get rid of it. This DIY project is a great way to turn scrap 4″x4″ lumber into a kid-friendly puzzle featuring their favorite animal. A single 5′ piece of 4″x4″ lumber (which, in a typically confusing turn of phrase in the construction biz actually means it’s 3 1/2″ x 3 1/2″), will easily make one 16-block puzzle. Even if you have to buy materials, it’s thrift-friendly, as the wood should cost no more than $7. To further drive down costs, I used leftover acrylic house paint from some other projects. Bare wood means extra coats, and the key here is to give it one solid coat of primer and then give it a minimum of 3 coats of paint on each side of the wood for an even, smooth finish.


elephantblockpuzzle_final2.JPG

Materials

Pencil
4″x4″ 5′-long piece of lumber
Miter saw or hacksaw
150-grit sandpaper
Four 1/2″ sponge brushes
Gesso or white primer
1/2″ paper tape
5 coordinating colors of acrylic paint
Elephant template provided below
, enlarge by 154% on 11″ x 14″ paper
Copy machine
3/8″ chisel-tipped paintbrush

Download PDF Download the Elephant template PDF
Right click to save the PDF to your desktop. Directions on downloading PDFs.

Directions

elephantblockpuzzle_step1.JPG
Step 1: Using your miter saw* or hacksaw, cut your 4″x4″ lumber every 3 1/2″ to make 16 blocks that are 3 1/2″x3 1/2″ each. Although one would think that 4″x4″ lumber would be 4″ by 4″, it is actually 3 1/2″, so your blocks should be perfect cubes. Sand the sides with sandpaper to smooth edges.
*Learn how to use a miter saw here.
elephantblockpuzzle_step2.JPG
Step 2: With a 1/2″ sponge brush, prime blocks with one coat of gesso on all four sides. I recommend painting two opposing sides at a time and letting them dry before moving on so your hands don’t get too messy. Let dry completely.
elephantblockpuzzle_step3.JPG
Step 3: Tightly arrange your puzzle blocks in a desired order, cut-side up – they might not be exactly even in height, so mix the higher and lower ones randomly. Give it one coat of white paint, wait to dry, then tape a striped pattern onto the blocks. This is the B-side to the puzzle.
elephantblockpuzzle_step4.JPG
Step 4: Paint the blocks red over the tape. Brush paint outward from the tape, using small amounts to minimize paint running under the tape. Paint at least 3 coats, giving the paint time to dry between coats.
elephantblockpuzzle_step5.JPG
elephantblockpuzzle_step5a.JPG
Step 5: Inevitably, no matter how careful you are, paint will run under the tape. Use your sponge brush to touch up the white paint.
elephantblockpuzzle_step6.JPG
Step 6: Turn each block on its side and use your sponge brush to paint two opposite sides the color of your choice. I chose yellow because bright colors like yellow, red, and orange are thought to stimulate brain activity in children. I recommend three to four coats for a nice, even finish.
elephantblockpuzzle_step7.JPG
Step 7: When the first two sides are dry, paint the next two opposite sides another color. Here I chose gray to give a break to the eye from all the bright colors. Too many bright colors can be over-stimulating!
Tip: Make a line across the top of the block and painting downward to keep the colors from dripping onto the other sides of the blocks.
elephantblockpuzzle_step8a.JPG
Step 8: Enlarge the elephant template to 154% on a copier, then cut out the elephant. Figure out the placement of the elephant on the puzzle. I made sure that there was a part of the elephant on each block to make it easier to assemble the puzzle.
elephantblockpuzzle_step9.JPG
Step 9: Lightly trace the elephant onto the puzzle with a pencil.
elephantblockpuzzle_step10.JPG
Step 10: Use your flat-tipped angled brush to fill in the penciled outline.
elephantblockpuzzle_final.jpg
About the Author:
Sonya.Photo.jpg
Sonya Nimri lives and crafts in a little house in Venice Beach, Calif. She is the author of two books: Beadalicious and Just for the Frill of It. Visit her at sonyastyle.com for lots of project ideas.


Related

Comments

  1. A. Brown says:

    Since this is for kids, should it be sealed in any way?

  2. Sonya Nimri (author of this project) says:

    Sealant is made up of the same stuff paint is made of so I do not think a sealant is going to make a safer for kids. Paints these days are so low in VOC and lead free and are perfectly safe for the little hands and mouths. If you are worried about toxins in the paint however, you can go with a no-VOC paint like Mythic paints. Or, if you would like to seal it to protect the look of the blocks, Vermont Natural Coatings makes a sealant that is as natural as they get. I would not recommend a spray sealant at all because anything coming from a spray can is going to be much more toxic than a brush-on variety.

  3. Felinda says:

    Way to brainwash your kids early. How about making the favorite animal a donkey?

  4. Carla says:

    I love this–and my preschoolers love elephants too! It would work great on premade squares from craft stores too! I’m pinning this to my Gifts for Preschoolers (DIY Style!) board!