Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

nauticalpotgroup.png
Mary Leigh Howell of Dig. Drop. Done. sends us this project idea to dress up a planter with just a few supplies. Check out the jump to learn how you can make this nautical accessory yourself.
More:


Instructions

  • Measure 1 piece of rope 23′ (ft) long for the top rim
  • Measure 2 pieces of rope 26″ (in.) each for the center ring
  • Wrap rope ends with scotch tape to deter fraying.

To Start Wrapping Rope

  • Add glue to one end of the rope, place glued end onto outside rim of the planter
  • Continue to add glue onto the planter, then gently press the rope onto the planter
  • Continue to glue and wrap rope around the planter 8 x around (or the height of your rim)

To Create Ring

  • Loop each end of rope to the ring
  • Center ring/rope onto planter
  • Add glue to back of loops and press onto planter. Hold in place for one minute

  • Continue to glue and wrap remaining rope around the planter

Related
blog comments powered by Disqus

Featured Products from the MakerShed

Follow

Get every new post delivered to your Inbox.

Join 25,792 other followers