Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

CZ_CelebrateTheSeason.gif
craftzine spool ornaments 12 Project: Sparkling Thread Spool Ornaments
The staff here at Craftzine must be hitting the eggnog a little to hard, because with 12 days until Christmas, we decided we would all swap ornaments with each other! That meant quickly creating a handful of stunningly beautiful ornaments, befitting my fellow Craft bloggers. Behold, these vintage thread spool ornaments- they are quick, sparkling, and of course, crafty.


craftzine spool ornaments 01 Project: Sparkling Thread Spool Ornaments

Materials

Thread spools
Mismatched earrings
Ribbon
Fabric scraps
Wire
Wire cutters
Scissors
Hot Glue

Directions

craftzine spool ornaments 02 Project: Sparkling Thread Spool Ornaments
Step 1: Cut the post off of an old earring.
craftzine spool ornaments 04 Project: Sparkling Thread Spool Ornaments
craftzine spool ornaments 05 Project: Sparkling Thread Spool Ornaments
Step 2: Cut a small fabric scrap that coordinates with the color of the thread spool. Gather the fabric onto the end of the wire. I used a long wire pin for making jewelry, and bunched the material up around the head of the pin.
craftzine spool ornaments 07 Project: Sparkling Thread Spool Ornaments
Step 3: Cut a piece of ribbon about 6″ long, fold it in half, and thread it through the spool. The loop will poke out the top, and the tails will hang from the bottom. Be sure to make the loop big enough to easily fit over the branches of a tree.
craftzine spool ornaments 08 Project: Sparkling Thread Spool Ornaments
Step 4: Turn the ornament upside down and place a small dap of hot glue into spool of thread. While the glue was still hot, I gave the loop a little tug to pull the ribbon up a bit and help conceal the glue inside the spool.
craftzine spool ornaments 09 Project: Sparkling Thread Spool Ornaments
Step 5: Before the hot glue has fully set, insert the wire stem of the fabric ruffle into the top of the spool. Press it down so the wire hits the glue and is secured.
craftzine spool ornaments 11 Project: Sparkling Thread Spool Ornaments
Step 6: Add a tiny drop of hot glue to the front of the wooden spool. Press the earring into the glue to attach it. Sparkle, sparkle!


Related
blog comments powered by Disqus

Related Supplies at Maker Shed

Follow

Get every new post delivered to your Inbox.

Join 26,586 other followers