Sew a Drawstring Bike Seat Cover

Craft & Design Yarncraft

In this edition of the CRAFT Video, I’ll show you how to make a custom fabric bike seat cover. You might make one if your bike seat is in disrepair, needs protection from rain, or, if you’re like me, you want to cover up your nice saddle to deter potential thieves from lifting your seat while your bike is locked up outside.

Subscribe to the CRAFT Podcast in iTunes, watch it on YouTube, Vimeo, or download the m4v video.

Step 1: Make a pattern
To create a cover that fits your bike seat perfectly, trace a pattern onto paper, following the outside contour of the bike saddle. don’t worry, it doesn’t have to be pretty. To clean up the pattern, fold it in half and draw one smooth line approximating the edge you traced earlier. Add a one inch seam allowance while you’re at it, and cut out the pattern piece, which will now be symmetrical.

Step 2: Pin, cut, and pin
Pin the pattern to your fabric. I’m using a stretch polyester, which will fit snugly and help repel moisture. Cut the fabric all the way around the pattern. Since we’ll be sewing the drawstring casing to the wrong side of the fabric, cut 1/2-inch slits along any concave curves to allow the edge to fold easily. Start pinning a 3/4-inch hem along the edge. I like to pin points directly across from each other first, then gradually fill in the remaining sections by bisecting them with pins until the entire edge is secured. For this project, the more pins, the better.

Step 3: Sew the casing
Move over to the sewing machine and sew along the pinned edge, leaving a space at the center back for inserting the drawstring. This is where having lots of pins helps create a flat casing by preventing bunching. I’m using an old conference lanyard as a drawstring, since it has a convenient little spring-loaded plastic adjuster, but you could just as easily use an old shoelace or a small scrap of elastic. Use a safety pin to thread the drawstring through the casing.

Step 4: Affix to your bike seat
The anatomy of your bike seat might be different than mine, but for me it was best to start by securing the cover over the nose of the saddle, then hold it in place while stretching it over the wider back section. Tighten the drawstring, and you’re ready to ride.

Let us know about your bike mods and accessories in a comment below! Photo above is by Matt Mets.

More:

2 thoughts on “Sew a Drawstring Bike Seat Cover

  1. Collin Cunningham says:

    Sweet vid Becky!
    That bike looks like a fancy aristocrat … but yaknow, from Brooklyn =]

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

Becky Stern is a Content Creator at Autodesk/Instructables, and part time faculty at New York’s School of Visual Arts Products of Design grad program. Making and sharing are her two biggest passions, and she's created hundreds of free online DIY tutorials and videos, mostly about technology and its intersection with crafts. Find her @bekathwia on YouTube/Twitter/Instagram.

View more articles by Becky Stern

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK