My Own FrankenBrewery

Food & Beverage

homebrew

My first brewing experience came via a Mr. Beer kit. The result, something akin to brownish vinegar, left much to be desired. I knew I needed better equipment, so I started with a few plastic buckets and a turkey fryer. My results improved, and I was hooked, but not satisfied. I wanted a system that allowed me to make beer from scratch — no more extracts, no more Mr. Beer.

I spent a few weeks formulating ideas and sketching out the mad science it would take to give life to my newfound passion. I developed a parts list as

I went along, and scoured thrift stores and badgered friends for the necessary components: essentially, two pots or kettles to brew the beer in; a frame or stand to hold the kettles; a way to heat the beer; and a pump to circulate the contents through the system. An old steel table became the base for the stand, and abandoned kegs from a local liquor store served as my kettles. The table formerly had a glass top, so I had to fill in the gaps with scrap metal and use more scraps to complete the basic framework. With some amateur welding and a fresh coat of paint, I soon had the infrastructure in place.

Next, I needed some heat. With my old system, I’d used propane to boil the wort (unfermented beer). I wanted my “FrankenBrewery” to run on electricity, not only for consistency in temperature but also in case I ever found a way to power it with the sun. My solution divided the system into two parts: high-voltage and low. The front control panel was designed to run on 12V DC, and a sealed NEMA box housed the 240V AC power for the heating elements. For temperature control, I adapted a PWM circuit to vary the power to the elements.

Next, I developed a way to move my brew from kettle to kettle. The use of an electric ball valve allowed me to remotely control flow from the pump. Using a mix of copper and PEX tubing for the main routes, I incorporated a quick-change panel on the front to help move fluid around using only one pump. I was ready for a test run.

On a frigid Colorado afternoon, I hooked up the power and started flipping switches. Lo and behold, rather than the lights flickering and the machine rising up and smashing through the door, it worked like a charm. Since the inaugural run, several delicious batches of beer have flowed through my creation, with the process becoming more familiar and more fulfilling each time.

Discuss this article with the rest of the community on our Discord server!
Tagged

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK