Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!
Fig. C: Magnify!

Fig. C: Magnify!

Gelatin is used in lots of things like food, candy, and pharmaceutical and paintball capsules, but it also has interesting optical properties. Before plastics, it was used to make colorful filters for theatrical lighting and photography (called “gels”).

suck-and-seal

Fig. A: Suck and seal!

cast-gelatin

Fig. B: Cast gelatin.

A fun way to play with gelatin optics is to cast lenses. Mix the gelatin in a very concentrated form, about 1Tbsp powdered gelatin in ⅛ cup of water, and leave to set in the bottom of a rounded bowl or dish. (A concave watch glass makes a perfect lens mold!) You can also make a convex lens mold by stretching plastic wrap over the mouth of a glass and then sucking out the air before quickly sealing the wrap (Figure A). The stretched film will make a wrinkle-free concave shape. Add a rubber band around the rim to keep it sealed airtight. Pour the gelatin mix on top and let set in the fridge (Figure B). When set, remove the wrap to use the lens (Figure C). Unflavored gelatin makes clear lenses, but you can use flavored gelatin to play with colored filters, too.

gelatin4

How powerful is your lens? That depends on the shape and the material: 1/focal length = (n – 1) (1/lens radius). With a refractive index of around n = 1.38, gelatin is less refractive than glass (n = 1.51) and only slightly more than water (n = 1.33). I’ll leave it to you to combine two gelatin lenses to create a “jello-scope.” When you’re done looking, eat your edible optics!

gelatin5

 

MAKE Volume 34: Join the robot uprising! As MAKE's Volume 34 makes clear, there’s never been a better time to delve into robotics, whether you’re a tinkerer or a more serious explorer. With the powerful tools and expertise now available, the next great leap in robot evolution is just as likely to come from your garage as a research lab. The current issue of MAKE will get you started. Explore robot prototyping systems, ride along with the inventors of the OpenROV submersible, and learn how you can 3D-print your own cutting-edge humanoid robot for half the price. Plus, build a coffee-can Arduino robot, a lip balm linear actuator, a smartphone servo controller, and much more

On newsstands now, by subscription, or available in the Maker Shed

Buy now!

Bob Knetzger

Bob Knetzger

Bob Knetzger ([email protected]) is an inventor/designer with 30 years of experience making fun stuff.


Related
blog comments powered by Disqus

Featured Products from the MakerShed

Follow

Get every new post delivered to your Inbox.

Join 25,778 other followers