MAKE’s Illustrated Board Glossary

Arduino Technology
MAKE’s Illustrated Board Glossary

M36-boards-glossary

Editor note: MAKE’s Illustrated Board Glossary is featured in our just released Vol. 36–the board’s issue. Read all about it here. Like what you see? Subscribe right here

Development boards come in many different types and sizes, with vastly different feature sets. Comparing the particular spec of one board directly to another will rarely give you the full picture. Here are some of the common parts and terms that come into play when evaluating different boards.

1. Processor

The chip at the core of your board. It’s the brain of your project, handling most of the functionality. Most processors can be classified as either a microcontroller, designed to control basic digital electronics, or a system on chip (SoC), which are more powerful processors similar to those in computers. Boards with SoCs are often called single-board computers (SBC).

2. Input/Output (I/O) Pins

Sockets that you use to connect LEDs, buttons, sensors, relays, motors, and other parts. You’ll typically use a separate breadboard (a small panel with rows of sockets) and jumper wires to connect your board’s I/O pins to electronic components while you’re prototyping or developing your project.

The pins come in a few varieties, and often have multiple capabilities. Digital pins can read and control digital components. Analog input pins can read a range of voltages from analog components such as temperature sensors and dials. PWM pins allow for digital emulation of analog output. Some pins can also use communication protocols such as serial, SPI, I2C, or CAN bus to talk to other devices.

3. Power Input

For powering the board. Some boards accept a range of voltages, many others accept only 5 volts. Usually in the form of a DC barrel jack (pictured) or USB connector.

4. User LEDs and Buttons

Usable to indicate a status (in the case of an LED) or as an input (in the case of a button) without the need to wire up any additional circuitry. Other on-board LEDs may indicate whether the board is powered on, transmitting or receiving data, or accessing the flash memory.

5. Networking

On-board Ethernet ports, standard on most SoC boards and certain microcontrollers, allow you to connect to the internet via your router. Some boards even have built-in wi-fi chips for wireless connectivity.

6. USB Host Port

For connecting peripherals such as keyboards, mice, cameras, and wi-fi adapters. Available on many boards, especially those with an SoC processor.

7. Programming Port

Some boards connect to your computer via USB so you can reprogram the chip.

Expansion Boards

Printed circuit boards that attach onto your development board to give it additional functionality such as Bluetooth, cellular, GPS, sound, graphics, and motor control. Also called shields with Arduino and capes with BeagleBone.

As microcontrollers and SoCs continue to advance, many expansion board functions are becoming incorporated directly into them.

Integrated Development Environment (IDE)

Where you write, compile, and debug your code. Many platforms use IDE software on your computer that also takes care of programming the chip, usually via its USB connector. Some network-enabled boards have a web-based IDE, so that you can use your internet browser to connect to the board and program it that way.

The boards’ programming languages depend mostly on the platform. C, C++, Python, BASIC, and JavaScript are commonly used. SoC platforms are especially flexible and can be programmed in many different languages.

Libraries

Downloadable prewritten code that help you by making complex coding tasks much simpler. Frequently written to work with a particular board.

Discuss this article with the rest of the community on our Discord server!
Tagged

Matt Richardson is a San Francisco-based creative technologist and Contributing Editor at MAKE. He’s the co-author of Getting Started with Raspberry Pi and the author of Getting Started with BeagleBone.

View more articles by Matt Richardson

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK