When you’re working with projects involving vacuum pumps, vacuum gauges will show you the pressure in the chamber being evacuated. There are many different approaches to measuring the pressure in a vacuum, but we’ll focus on one of the most common, called the Bourdon pressure gauge.
At the heart of the Bourdon gauge is a C-shaped flattened tube that is connected to the chamber being evacuated. The removal of the air in the tube causes the tube to bend slightly, which moves a mechanism attached to the end of the tube. This mechanism amplifies and converts the bending motion into rotation, moving the pressure dial to indicate the pressure in the tube.
7 thoughts on “Skill Builder: How to Use Vacuum Gauges”
Comments are closed.
ADVERTISEMENT
Support Make:
Join Make: Community Today
Join Make: Community Today
Some New Features with makezine….. Go To Next Page
Although the chart is informative, it’s misleading. The main problem is that the “zero” value is placed incorrectly on the chart. If you absolutely needed to put a zero on the chart (which really isn’t needed), it should go to the extreme left of the x-axis. This is because a true zero (absolute) vacuum, which doesn’t exist, is lower than ANY other value shown on the chart.
Good catch! I’ll fix that mistake and re-upload the image. Thanks for letting us know!
My pleasure, glad to help.
…………….Feel Freedom makezine…….
……………….. Find Get More </b
….All time hit the makezine. Find Here
…..Last Few Days To Get Smart Deal with make < Find Here