Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Make: Projects

CEB Leg Holders

Make versatile leg holders compatible with many Open Source Ecology machines.

CEB Leg Holders

We suggest you prepare all leg holders at once, doing each step for all leg holders before moving on.

Related

Steps

Step #1:

PrevNext
CEB Leg HoldersCEB Leg HoldersCEB Leg Holders
  • You will need 14 Leg Holders for the CEB. 12 will be used in this step. Save the remaining ones for later. Make all leg holders at once to save time.
  • Torch a 3/4” hole in the center of one of the faces of the tubing; make sure it's large enough for a 3/4” bolt.
  • It's not crucial that the hole be centered. It just needs to be somewhere close to the center.

Step #2:

PrevNext
CEB Leg HoldersCEB Leg HoldersCEB Leg Holders
  • Weld the nut over the hole, ensuring the nut is level, and the hole is clear.
  • Make sure no spatter goes into the threads by covering the top of the nut.
  • Thread the bolt onto the nut.

blog comments powered by Disqus

Related Supplies at Maker Shed

Follow

Get every new post delivered to your Inbox.

Join 26,586 other followers