Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Steps

Step #1: Prepare the horizontal members.

PrevNext
CEB Main Frame: U-Channel Prep
  • Mark the holes in the horizontal members as shown in the diagram. Center punch them.
  • DON'T PUNCH THEM! They will be mag-drilled in a later guide.

Step #2: Prepare the drawer members.

PrevNext
CEB Main Frame: U-Channel PrepCEB Main Frame: U-Channel PrepCEB Main Frame: U-Channel PrepCEB Main Frame: U-Channel Prep
  • Mark and center punch the 4 holes on the face of the U-channel.
  • DON'T PUNCH THEM! They will be mag-drilled later
  • Torch holes for 3/4" drawer adjustment bolts as shown in the diagram.
  • Grind away the slag.

Step #3:

PrevNext
CEB Main Frame: U-Channel PrepCEB Main Frame: U-Channel PrepCEB Main Frame: U-Channel PrepCEB Main Frame: U-Channel Prep
  • Weld 3/4" nuts to the outside of the U channel where the holes are torched.
  • Weld it with a bolt coming thru the other side so it protects the threads and so you know the nut won't get off center.
  • Grind away any spatter between the bolts.
  • Make (4) 3/4" x 3.5" bolts using 3.75" threaded rod and steel nuts. See Making Bolts.
  • Thread the bolts through the nuts and thread another nut on top as shown.

Step #4: Prepare the vertical members.

PrevNext
CEB Main Frame: U-Channel PrepCEB Main Frame: U-Channel PrepCEB Main Frame: U-Channel Prep
  • Punch the holes as shown. The diameters are 3/4".
  • Torch the roller slots as shown.
  • Insure a 1/2" bolt goes thru it.
  • Grind away the slag.
  • Weld the the thin cylinder support nuts, taking care to protect the threads.

blog comments powered by Disqus

Featured Products from the MakerShed

Follow

Get every new post delivered to your Inbox.

Join 25,765 other followers