A Dutchman is a wood patch or filler which replaces a damaged or missing area of any wood object. The procedure involves removing a symmetrical, squared area around the defect and replacing it with new wood. It is best to use wood of the same species, grain pattern and color as the original. An ideal Dutchman repair would use a piece of the damaged board for the patch.

Since sharp woodworking tools are involved, use extreme caution and care. A Dutchman repair is best made by an experienced woodworker.

Project Steps

Mark off area

Mark the damaged area to be removed with a sharp pencil and square.

Score

Next Previous

Score the pencil lines 1/16” – 1/8” deep with utility knife and square.

Remove the wood

Next Previous

Remove the wood within the knife cuts with a sharp chisel or a combination of router and chisel to the desired depth.

Usually ¼” – 3/8” is sufficient … the thinner the patch, the easier it might someday be accidentally loosened and pried out.

Create the Dutchman

Next Previous

Cut the Dutchman with a chop saw or table saw rip to depth and chop saw cut to length.

This can be done with just a utility knife and steel square cut to depth and a chisel down the end grain to remove the piece. The repair piece should be 1/16” – 1/8” thicker than the depth of the repair.