Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Make: Projects

Elephant Block Puzzle

A kid-friendly puzzle featuring your favorite animal.

Elephant Block Puzzle

Anyone who’s ever taken on an ambitious home-improvement project knows what it’s like to have spare wood lying around – and to want nothing more than to get rid of it. This DIY project is a great way to turn scrap 4"x4" lumber into a kid-friendly puzzle featuring their favorite animal. A single 5′ piece of 4"x4" lumber (which, in a typically confusing turn of phrase in the construction biz actually means it’s 3 1/2" x 3 1/2"), will easily make one 16-block puzzle. Even if you have to buy materials, it’s thrift-friendly, as the wood should cost no more than $7. To further drive down costs, I used leftover acrylic house paint from some other projects. Bare wood means extra coats, and the key here is to give it one solid coat of primer and then give it a minimum of 3 coats of paint on each side of the wood for an even, smooth finish.

Project originally appeared on CRAFT.

Related

Steps

Step #1:

PrevNext
Elephant Block Puzzle
  • Using your miter saw* or hacksaw, cut your 4"x4" lumber every 3 1/2" to make 16 blocks that are 3 1/2"x3 1/2" each. Although one would think that 4"x4" lumber would be 4" by 4", it is actually 3 1/2", so your blocks should be perfect cubes.
  • Sand the sides with sandpaper to smooth edges.
  • *Learn how to use a miter saw here.

Step #2:

PrevNext
Elephant Block PuzzleElephant Block PuzzleElephant Block Puzzle
  • With a 1/2" sponge brush, prime blocks with one coat of gesso on all four sides. I recommend painting two opposing sides at a time and letting them dry before moving on so your hands don't get too messy. Let dry completely.
  • Tightly arrange your puzzle blocks in a desired order, cut-side up - they might not be exactly even in height, so mix the higher and lower ones randomly.
  • Give it one coat of white paint, wait to dry, then tape a striped pattern onto the blocks. This is the B-side to the puzzle.

Step #3:

PrevNext
Elephant Block PuzzleElephant Block PuzzleElephant Block PuzzleElephant Block Puzzle
  • Paint the blocks red over the tape. Brush paint outward from the tape, using small amounts to minimize paint running under the tape. Paint at least 3 coats, giving the paint time to dry between coats.
  • Inevitably, no matter how careful you are, paint will run under the tape. Use your sponge brush to touch up the white paint.

Step #4:

PrevNext
Elephant Block PuzzleElephant Block PuzzleElephant Block Puzzle
  • Turn each block on its side and use your sponge brush to paint two opposite sides the color of your choice. I chose yellow because bright colors like yellow, red, and orange are thought to stimulate brain activity in children. I recommend three to four coats for a nice, even finish.
  • When the first two sides are dry, paint the next two opposite sides another color. Here I chose gray to give a break to the eye from all the bright colors. Too many bright colors can be over-stimulating!
  • Make a line across the top of the block and painting downward to keep the colors from dripping onto the other sides of the blocks.

Step #5:

PrevNext
Elephant Block PuzzleElephant Block PuzzleElephant Block Puzzle
  • Enlarge the elephant template to 154% on a copier, then cut out the elephant.
  • Figure out the placement of the elephant on the puzzle. I made sure that there was a part of the elephant on each block to make it easier to assemble the puzzle.
  • Lightly trace the elephant onto the puzzle with a pencil.

Step #6:

PrevNext
Elephant Block PuzzleElephant Block PuzzleElephant Block PuzzleElephant Block Puzzle

Use your flat-tipped angled brush to fill in the penciled outline.


blog comments powered by Disqus

Related Supplies at Maker Shed

Follow

Get every new post delivered to your Inbox.

Join 26,151 other followers