Take me to the Steps

A GPS unit is a great CAR accessory, but the power cord hanging across the dashboard is an eyesore. Many vehicles have 12V power at the rear-view mirror, with a 2-wire plug. Tap into it to straighten up your view.

You will need:

  • 12V power receptacle I used the Philmore TC600 cigarette lighter plug socket.
  • Wire, 2-conductor, insulated, 20-gauge solid, 6″ such as bell wire. Or 2 lengths of single-conductor wire.
  • Cable ties (5) aka zip ties
  • Wire cutter/stripper
  • Soldering iron and solder
  • Ohmmeter or multimeter

 

MAKE Volume 34: Join the robot uprising! As MAKE's Volume 34 makes clear, there’s never been a better time to delve into robotics, whether you’re a tinkerer or a more serious explorer. With the powerful tools and expertise now available, the next great leap in robot evolution is just as likely to come from your garage as a research lab. The current issue of MAKE will get you started. Explore robot prototyping systems, ride along with the inventors of the OpenROV submersible, and learn how you can 3D-print your own cutting-edge humanoid robot for half the price. Plus, build a coffee-can Arduino robot, a lip balm linear actuator, a smartphone servo controller, and much more

On newsstands now, by subscription, or available in the Maker Shed

Buy now!

Project Steps

Wire your socket.

Unscrew the Philmore lighter socket to reveal the lugs. Strip 1/4″ of insulation off all ends of your wire pair. Solder one wire to the center lug (+), and the other wire to one of the outer lugs (–). Reassemble the socket.

Check polarity of the mirror plug wires.

Make sure your car is turned off. Use your ohmmeter to find continuity between a ground (such as the metal housing of the 12V socket in your dash) and one of the existing wires at the 12V mirror plug. The wire with zero resistance is the ground (–).

Connect your socket.

Push your socket wires into the mirror plug, (–) to (–) and (+) to (+), making sure they make good contact. Zip-tie them to the plug wires so they stay put. (For a permanent connection, you could solder them.) Finally, zip-tie your new 12V socket securely in its hiding place.

Your new 12V socket behind the mirror is ready to power your GPS navigation unit, radar detector, or other gadgets that are suction-cupped to the windshield.

NOTE: If your mirror lacks a plug, try tapping into a courtesy light near the mirror.

Going Further

To mount a gadget permanently, you could solder its wires to the plug, with no socket. But I wanted my GPS to be removable.