Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Eight mini servo motors and an assortment of acrylic pieces combine to create the QuadBot, a low-cost, four-legged robotic pet you can assemble in under an hour. The kit doesn’t come with brains or batteries; add those yourself. Each leg uses two servos, making this a 2DOF (two degrees of freedom) walkerbot.

Exercising a bit of overkill, I tried out my QuadBot using a Dagu Spider controller, which can run up to 48 servos. For a less expensive option, try an Arduino Uno coupled with a servo shield.

QuadBot is tricky to program, but its designer, Russell Cameron, provides numerous examples on letsmakerobots.com under the username OddBot.

As with other walking robots, you should watch battery weight. Use small NiMH cells, not alkalines. I got 15 minutes of playtime with two 3×AAA packs wired in series on the underside of the robot.

Gordon McComb

Gordon McComb

Gordon McComb has been building robots since the 1970s and wrote the bestselling Robot Builder’s Bonanza. You can read his plans to take over the world with an army of mind-controlled automatons, along with other musings, at robotoid.com.


Related
blog comments powered by Disqus
Follow

Get every new post delivered to your Inbox.

Join 25,554 other followers