Tool Review: SunVolt Portable Power Station

Science
Tool Review: SunVolt Portable Power Station

MZ_Toolbox2010.gif

image-1

The SunVolt Portable Power Station is a portable solar panel that can be used to charge cell phones and tablets. There are actually two models, the SynVolt and the SunVolt Max. The first outputs 10 watts under optimal conditions, while the Max is rated for 15 watts, with 8-14.4 volts juicing your device. The SunVolt weighs 4.3 pounds and is the size of a 13″ laptop, while the Max weighs 5.75 pounds and is the size of a 17″ laptop.

So, you set up your SunVolt using the convenient stand built into the case. Contrary to the picture above, you really must have the thing pointed directly at the sun in order to actually charge up an iPad, for instance. I wasn’t able to get more than a trickle, myself–though in all fairness, a winter’s day in Minnesota doesn’t provide a reasonable amount of light to judge the solar panels’ stats.

image

I had more luck with the Solar Cache Battery Pack. This is a plug-in battery (not included with the SunVolt!) that fits into the case’s pocket. You could, therefore, just leave the solar panel in your window and charge the battery over a period of time if the light conditions aren’t optimal. Also in the case’s pocket you’ll find a mess of adapters, to fit the two power output plugs that lead from the solar panels. The various flavors of USB as well as an iPod are represented.

Overall I thought the SunVolt was a fine product. An easily transportable 10-watt solar cell that costs $99 ($129 for the Max) sounds like a pretty good deal to me. One disappointment I had was the physical quality of the vinyl case is less than stellar. It feels cheap, and the zippers don’t work very well. The big zipper one even broke after one day of use, forcing me to cut the case just to open it. Not good! But I wouldn’t call it a deal-killer either.

6 thoughts on “Tool Review: SunVolt Portable Power Station

  1. ECA says:

    Ok,
    I read your review and went to the site..
    1. NEITHER gives info on connection ports.
    Yours says 8 volts, and THEIRS says 5.5 volts or LESS..
    I saw the video and it looks like a Stereo headphone jack..with connectors.
    Do you REALLY want to carry around a bunch of connectors?? AND a cable?
    2. 10-15 watts? REALLY and no REAL voltage control? sounds like a good way to RUIN your battery REAL quick.
    3. wouldnt a USB plug be about the BEST solution?? as this is more for USB devices, then add a few specialty cables??
    4. Nice battery device BUT..
    “Uses high capacity rechargeable battery technology (17 Wh / 3400 mah) in a compact design”
    Wouldnt it be nice to use my OWN BATTERIES?? being able to recharge or USE 3-4 AA batteries in this unit would be a Wonderful idea. And give it MORE uses then being able to charge 1 item..

  2. producracy says:

    Good idea, but will really depend on the number of cycles the panel and battery can handle. Feels great to get your devices off the electrical grid. But until this is really proven, I’ll likely just keep charging my stuff up at work.
    -Andrew, producracy.com

  3. Gomadic Corp says:

    I think it’s important to highlight two additional points. 1. The voltage from the panel is absolutely regulated through our power regulation circuit. 2. The case, panel and circuit are covered by a lifetime warranty. If your zipper broke under regulation conditions, we would repair it.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

My interests include writing, electronics, RPGs, scifi, hackers & hackerspaces, 3D printing, building sets & toys. @johnbaichtal nerdage.net

View more articles by John Baichtal

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK