View All

Michael Colombo

In addition to being an online editor for MAKE Magazine, Michael Colombo works in fabrication, electronics, sound design, music production and performance (Yes. All that.) In the past he has also been a childrens’ educator and entertainer, and holds a Masters degree from NYU’s Interactive Telecommunications Program.


Comments

  1. Sharkcus says:

    oh.my.god. This slideshow is driving me crazy. I don’t know if it’s firefox or what, but it absolutely isn’t working right. Why not just put them in an article layout!?!?!

    1. Justin Ross says:

      Seconded on the slideshow being horribly broken.

      I can’t even get to the second slide, so I only got one tip for drilling better holes. :(

  2. Drew benson says:

    Wow, that slideshow is a disaster. I get half-way through reading one slide, the next slides in. I hit the back button, it goes forward again. I hit “View All Slides”, I get the next slide. I try to write a comment, and the comment box jumps up and down the page. The big question: why a slideshow? Slideshows are for pretty pictures, not informative instructions.

  3. Dek says:

    Yes slideshow is terrible. At least allow manual control of the show.

  4. Jonathan says:

    And neither the slideshow, nor the manual controls, work at all in Chromium…

  5. Todd says:

    The slideshow does not appear to be working in Firefox. I agree with the other comments here. Slideshows are for the “People Magazines” of the internet. Make should strive to be *more* informative, not less.

  6. no says:

    Ditto all of the above. Chrome 24.0.1312.57

  7. Slide show doesn’t work – Chrome Version 24.0.1312.57 m
    I liked the blog stories better when I could actually read the stories and see something other than the first photo.

  8. Porktree says:

    This couldn’t be any worse if it was done in powerpoint.

  9. Jason says:

    Argh! Why won’t the slideshow work for me?!?! I pretty much avoid any Makezine slideshows now just because they’re such a pain. I’ve been trained to not even bother.

  10. Ditto on the slideshow not working. In fact, I don’t think it’s ever worked properly for me (in FireFox 18.0.2). Heck, even this comment entry form seems to be acting all screwy right now…

  11. Gerhard Bocksch says:

    This slidewhow is stupid. I cant even read my own comment because it jumps up and down while typing.

  12. nurrys says:

    thank you for taking the time to take pictures for us as for the slideshow did not have a problem with it

  13. Tien Gow says:

    Interesting topic — please re-post as a normal article so we can read it. And PLEASE, no more slideshows!

  14. Chuck Malloch says:

    At least in Firefox, the slideshow is indeed the above-mentioned disaster.

  15. c1josh says:

    Where is the “Show All” button?

    XOXO

  16. seth says:

    this is not true for metal. with metal you need lots of force. the correct force for a 1/2″ drill in metal is 150 lbs !

  17. seth says:

    again slide 2 tis false. one good bit is all you need. the only time you should use multiple bits is a very small pilot hole for a rather large bit. using multiple bits just wears out the shoulders.

  18. no says:

    wow, the slideshow sucks for me too, but because it just doesn’t play nice with my resolution. There’s a large space between the top of the pop in and the top of the webpage, then about the same amount of space for the title of the slideshow. By the time I get to actual content, we’re a solid third of the way down my screen. Absolutely terrible.

  19. Peter Hansen says:

    I have two safety-related suggestions to add.

    First, certain types of bits such as Forstner bits and fly cutters should only be used in a drill press.

    Second, whatever you’re drilling needs to be secured so that it won’t spin if the bit catches. Hand pressure is not enough. Workpieces need to be clamped down or held against a fence of some sort.

  20. terrefirma says:

    it is a nice , BASic instruction, but if you are using visuals to instruct, put glasses on. Visual learners will remember what they saw, not what you said…

  21. Alan says:

    In addition to correct pressure as Seth mentioned, drilling metal does not always require a slow speed. Speed should be matched to the hardness of the metal and the type of bit; charts for this are widely available. Going slow in a soft metal like copper wil hog the bit, breaking it or yanking the drill out of your hands, a situation the author mentions that he has been injured by.

  22. cr0sh says:

    Regarding using oil for drilling metal – old timer machinists have always recommended bacon grease (doesn’t matter if it is rancid or not); keep it in the fridge, a little goes a long way, and it’ll make your shop smell great (well, if you’re not a vegetarian/vegan, I suppose!)…

  23. Heya i’m for the first time here. I came across this
    board and I find It truly useful & it helped me out a lot.
    I hope to give something back and aid others like you aided
    me.

Ten Tips for Drilling Better Holes