I always assumed that the process of making a hologram was so complex that it was limited to only those with access to expensive lasers and other fancy optical equipment. But when I heard that the Maker Shed started carrying Litiholo’s Hologram Kit, I was surprised that such a thing existed and I was eager to give it a try. After carefully following the directions, my first hologram was visible, but just barely. This was better than I expected, actually. The manual stresses that controlling vibration is the most important factor in creating a good hologram, but I live in a busy Brooklyn apartment building that often feels the low rumble of the subway trains rolling by. I tried to make another, but this time I increased the exposure time from five minutes to fifteen as the instructions suggested. The result was a surprisingly sharp hologram of a toy car.
The science behind the why holograms work and how they’re made is fascinating. In the video above, I explain that the holographic film is sensitive to the interference between the laser beam hitting the plate directly and the beam bouncing off the object. I won’t try to explain it any further, and I’ll leave it up to those who do it best: How Stuff Works has a great write-up of the principles behind these amazing 3D images.
Subscribe to How-Tos with Matt Richardson in iTunes, download the m4v video directly, or watch it on YouTube and Vimeo.
In the Maker Shed:
6 thoughts on “How-To: Holography”
Comments are closed.
ADVERTISEMENT
Join Make: Community Today
Did you know that you can make your own holograms? Matt Richardson shows you how to do just that with the Litiholo Kit, available in the Maker Shed:
Electronics
For more information about the science behind holography, check out:
http://science.howstuffworks.com/hologram.htm
ADVERTISEMENT
Join Make: Community Today
tiffany jewelry
tiffany co
tiffany jewellry
tiffany uk
tiffany necklaces
tiffany earrings
tiffany rings
tiffany bangles
tiffany bracelets
tiffany key rings
tiffany cuff links
vibram five finger
vibram 5 fingers
vibram five finger kso
vibram five finger bikila
vibram five finger shoes
http://www.uvibramfivefingers.com/vibram-five-fingers-men-s-shoes.html
http://www.uvibramfivefingers.com/vibram-five-fingers-women-s-shoes.html
http://www.uvibramfivefingers.com/vibram-new-arrival.html
pandora jewelery
pandora jewelry
pandora Australia
pandora sale
pandora jewellry
pandora Necklaces
pandora beads
pandora bracelets
pandora rings
this is great! Any suggestions on making multi-layered image holograms? Like a person standing in front of a landscape or something?
Nope, that kit takes it about to the limit with the car. I sat in when Nick Phillips was trying to hologram a real X-Wing fighter for Star Wars II (5 in the historic order) at Loughborough back in the 70s, but despite a full-length marble bed and doing it 3am when the traffic was virtually nil, it wouldn’t fix – either the time it took for the laser reflection from the far end to arrive was long enough for interference fringes to set in, or Heisenberg was a nigh-on certainty at that distance, or there was still sufficent earth grumble to affect it, but whatever, no go.
Nor, for that matter, can you do humans easily – we tremble enough sufficiently for it not to work. Heavier kit takes it to a depth of field of maybe six inches (you’re talking a 3-foot marble plate on anti-shock here), but beyond that the cost of plates and developing kit also puts it beyond pocket money prices.
What you’re basically doing is recording the difference between a fixed reference beam and a beam on what you’re holographing: that replays with the same laser as a virtual image of the original object, which appears exactly like the original from a wide range of angles – you can examine sides hidden when looked at from the other side, for example. If you break a holography plate, you can still do the same with the shards, just the viewing angle is much more limited.