Unlocking Circuits the Maker Way

Technology
Unlocking Circuits the Maker Way

combinator_img_38511
combinator_img_3380-01

Equal parts woodworking and electronics, The Combinator is a difficult but rewarding Weekend Project. It not only protects your valuable goods, it’s highly gratifying to say you made it yourself.

Rather than using a microcontroller (Arduino) or single-board computer (Raspberry Pi, BeagleBone Black) to handle logic, Jordan Bunker’s design uses integrated circuits (ICs) to test and compare voltage levels. For someone only familiar with software, the transition to testing conditional statements in hardware can seem daunting. Not to worry — this project is meant to address and calm such concerns (and, in the end, to build an awesome project).

Annotated combinator schematic
Annotated combinator schematic

Refer to the schematic and look closely at a and b, the output from two comparators. The two outputs become the inputs for AND gate 1 and are evaluated as follows: 1 is only true if both a and b are true. The truth table below shows in long form the evaluation of a and b in 1.

screen-shot-2014-12-12-at-11-18-49-amThe same truth evaluation done on a and b, in 1 is repeated with c and d, in 2, and also on e and f, in 3.

The next level of AND gate, 4, compares the input from 1 and 2, testing in the same way as 1 tested a and b.

The output of 4 and 3 are evaluated by the final AND gate, 5. If 5 is true, the servo inside the safe is powered and the latch unhooks from the door clasp, granting access to all your goodies stashed away.

combinator_500px

Sure, it’s a bit confusing at first, but so too are nested conditional statements in software. Our Weekend Projects are designed to be fun and approachable for all, and are great projects for learning new skills. For full project instructions to build your own Combinator — including all the woodworking — head on over to the project page.


 

3 thoughts on “Unlocking Circuits the Maker Way

  1. George Carlson says:

    Using comparators with open collector outputs would allow you to “wire-OR” the outputs and eliminate the AND gates.

  2. likama20 says:

    ……..>>>>^^*^*^*^*^i like me makezine…….

    ……………….. Find Get More </b

  3. judithIbennett says:

    check here on zziinne

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

I love to tinker and write about electronics. My days are spent building projects and working as a Technical Editor for MAKE.

View more articles by David Scheltema

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK