DIY cement casting…

Sill Mould0022From the folks who brought us the homemade sheet-rock lifter – cement casting with forms…“I designed these window sills as a DIY solution as to what to do with 200 plus windows we had to rebuild, this saved us from having to restore the brickwork that was damaged from years of neglect and weather. The most obvious solution would have been to restore the brick and slap a piece of wood on top. Instead I created a mould that was fastened to the wall and the sills were cast in place.” Thanks Frank! Link.

3 thoughts on “DIY cement casting…

  1. Fantastic. There’s been a surge in using concrete in high-end residential applications — this really kicks it up a notch.

    For folks interested in some gorgeous, jawdropping countertops, check out Fu-Tung Cheng here —> http://www.chengdesign.com/index.html .

    He’s got a line of DIY products to for the makers out there.

    1. Thanks for the compliment, Kebinator! (since it was posted 7 years ago, we have worked hard to design all sorts of projects, from firepits to stools, benches and bbq’s for the DIY’er)––on our new website Chengconcrete.com

      ––––yours, Fu-Tung Cheng

  2. My partner and i aren’t getting just what it’s good for to start with. Will it be considerably more then just the latest/greatest gadget that can just what all of the other folks perform at any rate? . -= Dennis Edell’s very last site… Feedback Competition in addition to Added bonus Champions : Mar! =-.
    air max 1 pas cher http://mofact.org/wp-content/temp/

Comments are closed.

Tagged

current: @adafruit - previous: MAKE, popular science, hackaday, engadget, fallon, braincraft ... howtoons, 2600...

View more articles by Phillip Torrone