Music
Jackhammer headphones

148902371 09Dccd4D8E
Chris writes – “My friend Ben from the UK was asking about new headphones and I suggested making a pair of Jackhammer Headphones (as found on Instructables). He found a pair of ear protectors and used a pair of Sony headphones to create his new cans. Here’s his result!”Link.

2 thoughts on “Jackhammer headphones

  1. I recently destroyed a pair of Sony’s ( snapped the wire in the middle of the lead ), and while repairing them, I would recommend two additional fixes to anyone pulling apart headphones:

    First, replace the old lead with a 3.5mm phono jack instead. This gives me a double pullout safety if I wander off from my player, let’s me use different lengths, and ensures I always have an M-M with me if I want to plug my player into something else. My real reason of course was that the Sony leads are really hard to solder being hair thin, lacquered, and intertwined with some kind of non-conductive fiber for strength.

    Second, a switch to remove the common ground between the L & R channel ( set it to float ) will provide weird effects, i.e. anything mixed equally across the left and right channel will be removed ( usually vocals ). I did this with a simple push toggle switch.

  2. Graphics are among the most ignored aspects of an internet site. Never mind full SEO a part of that and also visualize the particular window blind, explanation we now have these. At this point think the fact that bots are usually impaired way too in addition to are unable to read phrases in pictures that very well. We do know they evaluate that to get color and may also see folks.
    [url=http://mofact.org/wp-content/temp/]air max 1 pas cher[/url]

Comments are closed.

Tagged

current: @adafruit - previous: MAKE, popular science, hackaday, engadget, fallon, braincraft ... howtoons, 2600...

View more articles by Phillip Torrone