Easy to build CNC mill stepper motor and driver circuits

F5Loyu4F5R8Qrl0.Medium
F0Fqhg3F54Hj7Sb.Medium
Tom writes –

This is a follow up to the Easy to Build Desk Top 3 Axis CNC Milling Machine. Once you get the machine all put together its time to make it go. I’ll presume you already have some stepper motors mounted and ready to go. If not I can refer you to some resources as to where to get them. So it’s time to drive the motors. And here I’ve put together a circuit that I think is the absolute cheapest and easiest way to control stepper motors with step and direction signals. It works with many of the free or low cost softwares that produce step and direction signals through the parallel printer port. I’ll explain how it works but for those of you who just want to get on with it…

Easy to build CNC mill stepper motor and driver circuits – Link.

Related:
Easy to Build Desk Top 3 Axis CNC Milling Machine – Link.

 Blog 00921754000
Computer controlled CNC machine @ SEARS – Link.

 I Mill4
3D LEGO CNC router / milling machine – Link.

 ~Rheslip Pictures Xaxis
HOW TO – Make a CNC machine – Link.

Homebrew CNC surface mount PickNPlace machine – Link.

 Blog Fckbmshf3Hy3Sk9.Medium
HOW TO – Make a three axis CNC machine – Link.

More CNC action – Link.

6 thoughts on “Easy to build CNC mill stepper motor and driver circuits

  1. Keep the EasyDriver in mind. A dead simple open hardware circuit for driving steppers. Built versions are available from Sparkfun. I got one soldered 8 wires, hooked it up to a USBMOD4 and was stepping in less than half an hour in python.

  2. I figure this is the thought process tech-geeks go through when they’re writing a “tutorial”…

    1. Okay, let’s make a list. I’ve put together some notes for me to look at while I make this project. Let’s just list all of those notes.

    2. Okay, now how do people use those notes? … Well, fuck it! They can figure it out!

    There’s usually a missing step somewhere in these tutorials, and it goes something like: “Spend five years learning electronics.”

Comments are closed.

Tagged

current: @adafruit - previous: MAKE, popular science, hackaday, engadget, fallon, braincraft ... howtoons, 2600...

View more articles by Phillip Torrone