Arduino

By Brian Jepson

Brian Jepson

I'm a tinkerer and finally reached the point where I fix more things than I break. When I'm not tinkering, I'm probably editing a book for Maker Media.

View more articles by Brian Jepson
2
Share via

The 3rd Ignite Boston happened last week, and it had an enormous turnout. Among the hackers and geeks at Ignite were a couple of makers with blinky projects in hand. As it turns out, they were Arduino-powered. The video above takes a close look at the projects that John Luciani and Jimmie P Rodgers brought with them.

2 thoughts on “Arduino hackers @ Ignite Boston”

  1. I forgot to mention that all of my circuit schematics and board layouts are done with the open source gEDA/PCB software. My footprint library and various EDA tools are available at http://www.luciani.org

    (* jcl *) (a.k.a. John Luciani)

    Reply

Comments are closed.

By Brian Jepson

Brian Jepson

I'm a tinkerer and finally reached the point where I fix more things than I break. When I'm not tinkering, I'm probably editing a book for Maker Media.

View more articles by Brian Jepson