MAKE’s 3D Print Shop Weekend, Day 1

3D Printing & Imaging Home Workshop
MAKE’s 3D Print Shop Weekend, Day 1

(Photo by John Abella)

Yesterday was a thrill and change. We had a very productive day (and night) and were able to accomplish three tests on many of the machines. Today we’re doing more testing and at 3pm PDT will be hosting a Google+ Hangout on Air to share the weekend’s grand adventure and to join up with offsite 3D printing enthusiasts. Then we’ll be hosting an open house at the MAKE offices, at 4pm PDT, where you can see the printers in person. Our address is 1005 Gravenstein Hwy S., Sebastopol, CA 95472. If you’re in the area, stop on by!

Watch our Day 1 Slideshow

More:

16 thoughts on “MAKE’s 3D Print Shop Weekend, Day 1

  1. Make Magazine 3D Printer Shootout says:

    […] Hangout which was recorded and is hosted on YouTube as well.   A ton of my photos are in the Make slideshows for the event.    The special issue will be released November 13th. « A […]

  2. MAKE | Maker Faire New York 3D Printer Village: Interview with John Abella says:

    […] also recently here at MAKE headquarters for our weekend-long 3D printer shootout (see photos from Day 1 and Day 2), testing printers for our upcoming special issue, the Make: Ultimate Guide to 3D […]

  3. ○DIY/Tip▶ Maker Faire New York 3D Printer Village: Interview with John Abella « dot dot dob tob tob says:

    […] also recently here at MAKE headquarters for our weekend-long 3D printer shootout (see photos from Day 1 and Day 2), testing printers for our upcoming special issue, the Make: Ultimate Guide to 3D […]

  4. Maker Faire New York 3D Printer Village: Interview with John Abella says:

    […] also recently here at MAKE headquarters for our weekend-long 3D printer shootout (see photos from Day 1 and Day 2), testing printers for our upcoming special issue, the Make: Ultimate Guide to 3D […]

  5. MAKE | The Maker Movement Personified: Brook Drumm says:

    […] of weeks,” he said. “One such example: I delivered the third version of the Jr. to the 3D Printer Shootout at MAKE and after I talked to the people that used it and reviewed it a week or so later, I took […]

  6. The Maker Movement Personified: Brook Drumm says:

    […] a period of weeks,” he said. “One such example: I delivered the third version of the Jr. to the 3D Printer Shootout at MAKE and after I talked to the people that used it and reviewed it a week or so later, I took […]

  7. John Abella | Make Magazine 3D Printer Shootout says:

    […] Hangout which was recorded and is hosted on YouTube as well.   A ton of my photos are in the Make slideshows for the event.    The special issue will be released November […]

  8. Geek Girl & 3D Printing « The Laughing Programmer says:

    […] Make magazine have also been running a 3D printing weekend and have a slideshow presentation of day 1 and day 2. This is an example of what can be […]

Comments are closed.

Tagged

Gareth Branwyn is a freelance writer and the former Editorial Director of Maker Media. He is the author or editor of over a dozen books on technology, DIY, and geek culture. He is currently a contributor to Boing Boing, Wink Books, and Wink Fun. And he has a new best-of writing collection and “lazy man’s memoir,” called Borg Like Me.

View more articles by Gareth Branwyn
Send this to a friend
FEEDBACK