Flashback: Fabric Paper Chain

Craft & Design

craft_fabric_paper_chain

by Lish Dorset

I loved making paper chains when I was little as a way to countdown the days to something excited, like Christmas, or for impromptu decorations in my bedroom. Today I still love to make them, but sometimes I use such fun papers that I worry about storing them safely or, worse, having to recycle it if the papers are damaged or crushed. This got me thinking – what if I made those recognizable links out of a different material, like fabric, that I could use again and again? Fabric on its own would still be too flimsy, but if you add some heavy duty Wonder Under to it, the fabric links are ready to go. Top it off with Velcro closures and the links can be re-arranged or even stored flat. Here’s how you can make your own fabric “paper” chain just like I did using a few patterns from the Birch Fabrics Circa 52 collection.

fabrichain11.jpg

Supplies
I got about 8-10 links out of each fat quarter. I used four fat quarters.

  • Fabric fat quarters (you can pick up some at the store or cut your own – 18×22″)
  • Heavy Duty Wonder Under
  • Sticky Velcro dots
  • Iron
  • Ironing board
  • Cutting surface
  • Rotary cutter
  • Ruler
  • Scissors

fabricpaperchain1.jpg

Start out by ironing your fat quarter, pressing well to remove as many wrinkles as possible.

fabricpaperchain2.jpg

Fold the fabric on the longer side and cut in half.

fabricpaperchain3.jpg

With one piece of the cut fat quarter, place right side up on top of the Wonder Under. Line up one long and one short side to the piece of Wonder Under. Trim off excess Wonder Under. With your iron on the hottest setting, start ironing in the middle and work your way out. Use firm pressure as you move about the fabric. Turn the piece over and iron the back, too, making sure to use smooth motions to avoid creating wrinkles. Set aside and let cool for a few minutes.

fabricpaperchain4.jpg

Peel the backing off the Wonder Under. If you’re having a hard time peeling the fabric, iron again.

fabricpaperchain5.jpg

When the backing has been peeled off completely, take the other half of your fat quarter and place the wrong side to the backed side (right sides should face out). Iron again to fuse the two pieces together.

fabricpaperchain6.jpg

Trim your fused piece so that all sides are even. Mark two-inch increments along the piece. With your ruler and rotary cutter, cut out the two-inch strips.

fabricpaperchain7.jpg

Once your done rotary cutting, cut each strip in half.

fabricpaperchain8.jpg

Place a sticky Velcro dot on one end of the strip. Press and hold firmly to create a secure bond with the fabric and the Velcro. Place the matching Velcro dot on top and flip over the other end of the strip to create a link. Press and hold firmly once more.

fabricpaperchain9.jpg

Your link should now look like this.

fabricpaperchain10.jpg

Create as many links as you like. You can hide the ends in the middle of the links as you go along. Experiment with holiday colors, leftover scrap fabric, etc.

Discuss this article with the rest of the community on our Discord server!
Tagged

Haley Pierson-Cox from Red-Handled Scissors is a maker of crafts, a lover of cats, an avid swearing enthusiast, a cross-stitch book author, and a general purveyor of quirk. She's also sometimes an irritable cartoon named Tiny Cranky Haley. https://www.redhandledscissors.com

View more articles by Haley Pierson-Cox

ADVERTISEMENT

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 16th iteration!

Prices Increase in....

Days
Hours
Minutes
Seconds
FEEDBACK