Digital fabrication tools have revolutionized the way designers, engineers, and artisans express their creativity. With the right resources, you can learn to use these powerful instruments in no time! Whether it’s 3D printing or laser cutting that interests you, these articles will provide useful tutorials and inspiration for makers of all levels. Discover how digital fabrication can open up new possibilities so that your craftsmanship is truly extraordinary!
Jeri Ellsworth made this quick and dirty gas containment chamber for her laser cutter — to be able to test the gases generated from the lasing of various materials — using a silicon wafer (which the beam passes through) and a cookie tin. This rig can also be used to contain materials that might otherwise […]
The folks at iFeelBeta.de have created a chemical formula that will dissolve 3D-extruded PLA but leaves ABS alone. This is critical because it allows you to print a fabject with overhangs: you use the PLA as a support structure during the print, and when done you dissolve it. Now all we need are dual-extruder printers! […]
Very cool design from Thingiverse user msruggles, printed as shown above by user Linkreincarnate, who reports some reification issues with the model requiring hand finishing. Gonna keep an eye on this as it develops.
This lovely object is more than just an interesting gewgaw: It’s called a “turner’s cube”–so named, I think, because it is a challenge for one who turns on a lathe rather than eponymously–and according to Bob Warfield, “[i]n the old days, novice machinist’s [sic] were handed one and told to work out how to make one of their own.” Bob’s got a cool page describing his efforts to make one manually and then using a CNC mill, with some bonus commentary on this thread by CNC Zone member widgitmaster, who made the cube pictured above, using the jig pictured above, on a big engine lathe. Beautiful!
If you haven’t checked them out already, Zaggo‘s mini documentaries on the 3D printing phenomenon are a must see. [Via the MakerBot Blog.]
Shapeways now carries my material of choice for jewelry making: sterling silver. We are very proud to offer Sterling Silver as our latest production material! In the past we did a test with Silver Ring Poems and Cufflinks, but now you can order any design in brilliant shiny Silver, until at least November 7th. We’ll […]
This link came in the mailbag from one Junior Veloso, of Singapore, who has produced this very impressive homemade photopolymer-based 3D printer. Traditional stereolithography uses a scanning UV laser to cure the liquid resin, one layer at a time. A DLP printer is similar, but uses a micromirror-based video projector to expose each layer, as shown in the diagram. Junior’s version exposes each layer for four to eight seconds, resulting in print times on the order of several hours. The resin has to be opaque to prevent “shadowing” from light transmitted through the printing layer.
