Carpespasm writes in – The goal of this project was to help out a friend’s band by making a lighting kit for their shows that didn’t cost the $150+ dollars that a normal light kit costs. It also helps out a lot when I record their concerts to make sure the lighting isn’t too dim. […]
Tim’s back with a new KnowHow show – how to make a hammock Link.
Chris writes in – As a service to those Makers, like me, who are gradually becoming less and less young, here is a hack to make a pair of reading glasses that you can wear over your “normal” glasses (assuming nearsightedness is normal for you). instructables : Clip-On Metal Framed Reading Glasses – Link.
Dandeman321 writes – This simple CO2 regulator is used to slowly release CO2 gases from the fermentation process of wine or beer using water and a few parts that can be found quite easily. It works by allowing CO2 to get out of the fermenter without permitting oxygen to enter. If oxygen was to get […]
PKM shows you how to a make a minty strobe, a simple trigger-able strobe for taking action photos with – Link. Related: Phonograph turntable strobe zootrope – Link. HOW TO – Make a small portable strobe light – Link. HOW TO – Make a “Slave Strobe” – Link. HOW TO – Make a Strobe Out […]
R. Stern writes – I’ve started making blank books from recycled paper I find around work and home. The paper is blank on one side, so it provided plenty of space for notes and doodles, and even provides inspiration based on the printed matter on every other page. They tell a story about where they […]
Mike writes – The Pringles Wind Turbine (a.k.a. Power Leech or Pleech) is an attempt to turn simple items found at the hardware store and elsewhere into a working low-voltage power supply. The Pleech is design to take wind or other air currents (such as from A/C ducts, dryer vents, etc.) and convert that energy […]
