Wperry1 writes – “This project got started because I was going through $2-$3 300 watt halogen light bulbs about once a month and because the lamp in my office made as good a heater as it did a lamp. I wound up converting 3 lamps for a total cost of about $12 in lamp parts” […]
ShedLab writes – “A Hangman Style Bird Feeder and a seedy bread type victim. Made from oddments from around the house.” – Link. Related: HOW TO – Easy bird feeder hangers – Link.
Dan writes – “This is a pointer to a web site which shows a number of different design ideas. Use these as a starting place and come up with your own creative design. What you build will depend on what materials you have available to you.” [via] – Link.
Housekey writes – “To do this, all that is needed is a Polaroid Land camera, some small screwdrivers, and a small sheet of thin metal. These cameras can be found on eBay, or better yet, at yard sales. It will be made into a pinhole camera with several pinholes that can be switched into place, […]
Saul writes – “This is a simple belt made from old Tie-Down webbing and a few D-Rings. I experimented with Comic Life, a mac app for writing comics from photo libraries to build the how-to.” – Link. Also, visit Howtoons – Link. Related: Comic Life, make your own comics – Link. MAKE audio interview with […]
Giant writes – “Invisible Fence pet containment systems require a new battery in the dog’s collar every 3 months. Invisible Fence dealers sell battery packs for around $15. This expensive battery is a plastic case around a common CR1/3 battery, readily available from any hardware or drugstore for less than $5.00. Here is how to […]
Dbc1218 writes – “This is a full size(4ftx8ft) one person hovercraft built over one summer for less than $200. It was built with no prior experience or knowledge of hovercrafts but with sheer determination to build something different. So check this project out, hope you like it.” – Link. Related: Lots-o-hovercraft projects – Link.
