Sous Vide Cooker with Universal Controller
A sous vide immersion cooker using off-the-shelf parts plus some re-purposed elements. The controller is partitioned so that it can be used in other projects as well.
Continue ReadingA sous vide immersion cooker using off-the-shelf parts plus some re-purposed elements. The controller is partitioned so that it can be used in other projects as well.
Continue ReadingWhile you can always buy at a lamp at the store to save you time and money, this guide will provide you with the tools to build a one of a kind.
Continue ReadingThis project is extremely easy and simple for all. While children will need adult supervision, almost any age can create this. With a small amount of tools and virtually no money, you can have a new bowl for the house in no time.
Continue ReadingThis easy to make kitchen utensil only takes a short amount of time to build. Only a small amount of tools are required and parts can be found virtually anywhere.
Continue ReadingThis guide will share ideas for common materials you can use to create an one-of-a-kind RC car.
Continue ReadingThis project uses IRLB8721PbF MOSFETS. These particular devices are good for the Arduino because the base current required to fully open the gate is less than 5v. I chose to use a power supply case to house this project. The built in fan will supply plenty of airflow over the heatsinks attached to the MOSFET’s. […]
Continue ReadingThis project is not so much a step-by-step guide, but more of an idea. Sometimes buying something is not really the best thing to do. I have a lot of electronic test equipment and I could not find a reasonably priced desk or bench that would put everything within easy reach. So I decided to […]
Continue Reading