Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!
flashback_kaleidoscope_opener.jpg

With MAKE Volume 20, the Kids Issue, on newsstands right now, I got to thinking about previous MAKE projects that would be fun to build with the bambinos over the holidays. The Recycled Kaleidoscope project from MAKE Volume 14 would be a super fun build. Got any plastic CD cases laying around? Put em to use, along with whatever little bits of your choosing you want to include for the inside. Tiny electronic components? Itty bitty screws? So pretty!

Recycled Kaleidoscope
Make a classic optics toy from an old CD case.
By Carolyn Bennett

The kaleidoscope was invented in 1816 by a Scottish physicist named Sir David Brewster, and it has intrigued people of all ages ever since. Through the years, kaleidoscopes have been made of nearly every possible material. Now it’s time to take the kaleidoscope green. Here’s a simple one you can create from recycled materials and common household items. For the mirror elements, we’ll use pieces of an old “jewel box” CD case backed with black paper or neoprene.

MATERIALS

Clear CD case Try to find one that isn’t scratched.
Pencil with eraser
Pushpin or thumbtack
Scotch tape
Strong tape
such as electrical, cloth, or foam tape
Clear plastic lid like from a yogurt container
Craft glue
Beads, stickers, confetti, and assorted small treasures
Rubber bands (2)
Black paper or black neoprene/foam rubber
X-Acto knife
Ruler preferably metal
Small saw (optional)

DIRECTIONS

flashback-kaleid-figA.jpg

Step 1: Remove all the raised edges from 1 half of the CD case, to get a flat piece of plastic. It’s easy to cut the plastic, if you’re careful. Score along the inside edges of the CD case with an X-Acto knife, running it along each edge about 6-8 times. This will weaken the plastic. Then snap the ends off with your fingers.

flashback-kaleid-figB.jpg

Step 2: Cut 3 strips of case plastic that are exactly the same width. My easy method was to use the width of my ruler as the mirror width, scoring along each edge and then measuring the next strip from the previous edge. Score the plastic over and over; it will become so soft that if you keep scoring you could cut through it completely. Instead, align the score lines with the edge of a table, and snap the strips apart cleanly.

flashback-kaleid-figC.jpg

Step 3: Form an equilateral triangle shape (technically a prism) with the 3 strips of plastic. Use the rubber bands to hold the prism tube together, then wrap around it tightly with tape to secure it. You can remove the rubber bands after it’s taped.

Step 4: Cut a piece of black paper or foam that’s the length of the triangular prism tube and wide enough to wrap around it completely, with a little overlap. Glue or tape this black backing around the tube to create the mirrors.

Step 5: Measure and cut the pencil to the length of the prism tube plus enough to let the eraser hang over the edge. You can cut through the pencil with an X-Acto, a utility knife, or a small saw. Make sure the cut end is smooth.

flashback-kaleid-figD.jpg

Step 6: Use electrical, cloth, or foam tape to tape the pencil tightly to the middle of one of the flat sides of the tube, running parallel along the outside.

Step 7: Glue beads and treasures to the yogurt lid with craft glue. Allow the glue to dry overnight. It will dry clear, so don’t be stingy; make sure everything is glued securely.

Step 8: Stick the pushpin or thumbtack through the center of the decorated lid and anchor it into the middle of the pencil eraser.

flashback-kaleid-final.jpg

That’s it. Spin the disk and look through the tube to a beautiful image! Making this kaleidoscope unlocks the principles of how the instrument works.

Learn more about all things kaleidoscopic at brewstersociety.com.

About the Author:

Carolyn Bennett (cbennettscopes.com) has been creating kaleidoscopes for over 35 years. She also enjoys photographing antique objects and the farmlands that surround her home.

Goli Mohammadi

I’m a word nerd who loves to geek out on how emerging technology affects the lexicon. When not fawning over perfect word choices, I can be found on the nearest mountain, looking for untouched powder fields and ideal alpine lakes.

I was an editor for the first 40 volumes of MAKE. The maker movement provides me with endless inspiration, and I love shining light on the incredible makers in our community. Covering art is my passion — after all, art is the first thing most of us ever made.

Contact me at snowgoli (at) gmail (dot) com.


Related
blog comments powered by Disqus

Featured Products from the MakerShed

Follow

Get every new post delivered to your Inbox.

Join 25,546 other followers