Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Friend of MAKE Niklas Roy built and installed in the Tschumi Pavilion in Groningen, The Netherlands this beautiful sponge ball apparatus to bring the joys of tangible particle acceleration to the people.  I love him for it.

 

pipes_day

pavilion_total2

What was the inspiration? In his words:

As I’m a fan of science and physics in particular, I find it a pity that the current particle accelerators make the observation of the little speedy particles so complicated. This should be something that a broader audience can enjoy! So when the Director of the Tschumi Foundation approached me and asked me if I’d like to build a machine inside their beautiful pavilion located in the center of a roundabout in Groningen, I saw my chance: I decided to construct a machine which would bring the tremendous joy of particle acceleration to everyone!

The heart of the system is a set of “particle bubbles” with a vacuum cleaner acting to reduce the air pressure in one bubble, leaving the other to equalize and suck a ball down its gullet in the process. 1000 balls flow through it at a rate of 13′ per second.

schematic

geargif

In order to make the experience interactive, Niklas created wonderful handprint touch sensor that allows people to reverse the air flow of the system, thus slowing and then reversing the ball direction.

P1020378

 

Rather than use an existing touch sensor, he built an optical sensor from LEDs and photo resistors, illuminating it with 500 optic fibers arranged in the shape of a hand. I think this is an appealing and clear user interface — not much out there says “place your hand here” quite like the graphical outline of a human hand.

psba_promopic_hires

 

P1040873

As a small bonus, check out the inside, semi-psychedelic perspective of a modified, tiny spy camera being accelerated through the system:

tubecam

For more details, see the project page.

John Edgar Park

John Edgar Park likes to make things and tell people about it. He works in CG animation at DisneyToon Studios and writes for Make, Boing Boing, and other places online and in print. You can find him at jpixl.net and twitter @johnedgarpark — if you like that sort of thing.


Related
blog comments powered by Disqus

Featured Products from the MakerShed

Follow

Get every new post delivered to your Inbox.

Join 25,545 other followers