Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

spiral ear 06 How To: Make Earrings from Electrical Parts
I love to go to the electronics store. The one in my neighborhood is called HSC, and it’s a warehouse of random parts and pieces. They have entire aisles dedicated just to switches, another just for attachments, and an entire room of wire. I have been known to wander the store for an hour, just looking at all the wire. The textures and colors and shapes of these components are so inspiring, that I find myself wanting to make jewelry as much as I’m wanting to make electronics!
This project is so simple. It doesn’t require any complicated steps or parts. I just let the wire and the alligator clips inspire me into making these fun geek chic earrings. And, if you wanted to, you could attach just about anything to the alligator clips, making them very versatile additions to any jewelry collection.


spiral ear 01 How To: Make Earrings from Electrical Parts
Materials:
Wires, 1 thin gauge, 1 thick gauge, and 1 in between
2 Alligator clips
French Hook Earrings
Wire Cutting Pliers

spiral ear 02 How To: Make Earrings from Electrical Parts
Step 1: Cut 1/2′ of the mid gauge wire. Bend it in half, and slip it through the loop on the french hook. Then, use the pliers to attach the alligator clip to the folded wire. Just press the tabs on the alligator clip down around to secure it. Now you have the base of the earring.
spiral ear 03 How To: Make Earrings from Electrical Parts
Step 2: Create spirals using the thinnest wire. To make them, just wrap the very thinnest gauge wire around the thickest gauge wire. Make tight and close wraps, as if you were coiling up a spring. Then, remove the large wire, leaving the spiral. Make one using the thick gauge wire as a base, and one using the medium gauge wire as a base. My large spiral is about 3′ long, and my small spiral is about 2′ long.
spiral ear 04 How To: Make Earrings from Electrical Parts
Step 3: Make a large tear drop with the large spiral, and a smaller teardrop with the small spiral. Nestle the small one inside of the large one. Secure their ends by tightly twisting them all neatly together with the pliers.
spiral ear 05 How To: Make Earrings from Electrical Parts
spiral ear 06 How To: Make Earrings from Electrical Parts
Step 4: Clamp the alligator clip onto the end of the wires. Then, make a second earring the same as the first by repeating Steps 1 through 4. Voila!


Related
blog comments powered by Disqus

Related Supplies at Maker Shed

Follow

Get every new post delivered to your Inbox.

Join 26,141 other followers