Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

CZ_Fiber_Arts.gif
spider loom img 5.jpg
By Emilee Gettle
I love collecting unusual craft patterns and looms, especially vintage ones. Earlier in the year I went to a vintage fashion expo. After meandering through a menagerie of oddly dressed individuals and great-grandmothers’ closet rejects, I found a small booth filled to the brim with old patterns, buttons, and lace. A leaflet from the 1930s with instructions on how to make lace with a spider loom caught my eye, and I instinctively snatched it up.
Spider looms were originally made in the 30s and 40s from light wood and even plastic, and sometimes they were sold in kits with a needle and pattern book. I found a few looms listed on eBay, but the bidding fervor made my pocketbook shrink in horror. So I decided to design my own loom using the pictures in the old leaflet.
In this tutorial, I will show you how to make your own spider loom. With this loom you can make round and square pieces of delicate lace. I’ve also included the original instructions from my amazing find to ease you into the process of learning to use the loom!


spider loom img1.jpg

Materials

Pattern, provided below as PDF
Scissors
Scotch tape
Scrap of foam board
X-Acto knife
Tapestry or upholstery needle

Pattern PDF:
Download PDF Download the Pattern PDF
Right click to save the PDF to your desktop. Directions on downloading PDFs.
Vintage Instructions PDF:
Download PDF Download the Pattern PDF
Right click to save the PDF to your desktop. Directions on downloading PDFs.

Directions

Step 1: Print the PDF pattern provided and cut it out along the solid line.
spider loom img 2.jpg
Step 2: Tape the pattern onto the piece of foam board and carefully cut the foam board with the X-Acto knife.
spider loom img 3.jpg
Step 3: Make sure the pattern is still taped onto the now-round foam board. Then use the needle to punch out each dot on the pattern. Make sure the hole goes through to the back. You will also need to punch a hole in the center of the pattern, where the large dark circle is.
spider loom img 4.jpg
Step 4: Remove the paper pattern, and you have your very own loom!
About the Author:
emilee gettle.jpg
Emilee Gettle loves reinventing vintage craft patterns and finds particular joy in constantly reorganizing her craft room and rediscovering orphaned projects. She writes about her latest finds, recipes, and mishaps at Heirloom Girl.


Related

Comments

  1. GiGi says:

    I was wondering how you work the lace after you have the loom?

  2. Emilee Gettle says:

    Hi Gigi! Check out the vintage pattern PDF in this how-to; it is just below the pattern PDF. I used these old time instructions to create the lace in the photo!

  3. Melanie says:

    Hi Emilee,
    Both PDFs seem to be for the pattern. Could you re-post the instructions please?
    Thanks

  4. Stephanie says:

    I can’t seem to find the pattern for the cardboard loom. Both PDF’s are the same. Could you re-post the loom pattern? This looks lovely, can’t wait to try it! Thanks

  5. darlane says:

    where is the pattern for the loom? both pdf’s are for the instructions for creating the lace. But not the loom pattern shown in photos.

  6. Karen says:

    I love trying these vintage patterns. Sometimes they take alot of thought. Thank you

  7. Karen says:

    Thank you for this craft pattern. I love vintage patterns. I have quite a few clothing, crocheting,and knitting patterns from the early to late 40s.

  8. Quidosuzann says:

    buy a , for special offer to take huge discount