- Like
- Digg
- Del
- Tumblr
- VKontakte
- Flattr
- Buffer
- Love This
- Odnoklassniki
- Meneame
- Blogger
- Amazon
- Yahoo Mail
- Gmail
- AOL
- Newsvine
- HackerNews
- Evernote
- MySpace
- Mail.ru
- Viadeo
- Line
- Comments
- Yummly
- SMS
- Viber
- Telegram
- Subscribe
- Skype
- Facebook Messenger
- Kakao
- LiveJournal
- Yammer
- Edgar
- Fintel
- Mix
- Instapaper
- Copy Link
Here’s a simple HOW TO on adding a LED to an Apple keyboard. Arkku writes “I opened up the keyboard (three screws in the bottom), located the +5v and ground leads (red and black wire in my keyboard) and soldered a 3.3v/30mA 5mm bright blue LED to them, with a 68ohm resistor. To make the light reach the clear base of the keyboard, I also made a small hole in the white plastic that touches the clear acrylic at the bottom of the keyboard and taped the LED in that hole with electrical tape.” Link.