Garrett Wade Japanese saw tool giveaway!

We’re thrilled that Garrett Wade has offered to give away several of their tools to MAKE readers. We’re giving away the lovely set of four Japanese pullsaws that Bill Gurstelle reviewed in his Dangerous Giving gift guide. We know that at least some of you have a thing for these saws (they appeared on several of our readers’ wish lists). We definitely covet them! We’re also giving away, to a runner up, one of the 9-1/2″ Ryoba saws (the two-bladed saw in the above picture). The four-saw set includes the Ryoba, a 6″ blade flush cutting saw, a 7″ long dovetail saw, and a detail trim saw.

To be eligible, all you have to do is leave a comment below. Tell us what you plan to do with these saws. Eligible comments will close at 10:30am PST tomorrow (12/11) and we’ll announce our two winners shortly after that. Good luck!

More details on the saws here.

UPDATE: And the winner of the four-saw set is:


And the winner of the Ryoba saw is:


Congrats to both of you! Email sent.

Special MAKE offer from Garrett Wade:

Garrett Wade is also offering MAKE readers free shipping on orders over $50, good until midnight December 19th. You need to use this link to trigger the offer, or you can add WGWAMK02 in the “enter” source code field during checkout.

538 thoughts on “Garrett Wade Japanese saw tool giveaway!

  1. Actually, yes, seriously. I’m working on refinishing an old piano (and my gut it for a workstation, depending on how a tuning goes. Still waiting for it to settle into its new home) and these would be great to help trim/restore some of the woodwork on it. Especially since I don’t actually own a hand saw at the moment (it’s on my Christmas list).

  2. Add them to the growing collection of tools my son and I work with down in the basement shop and then figure out something cool to make with them.

  3. There is this wooden puzzle that I’ve been thinking about making for awhile and then the desk comment above reminded me I have some desk additions to make and I have some molding that needs to get put in.

  4. Japanese saws are wonderful tools and Garrett Wade makes some of the best tools in the world. Excellent for molding!

  5. I would cut everything in my apartment into nice neat slices, and then pile them into nice neat stacks. It’s about time I got properly organized.

  6. I will turn my table saw on less, and use my hands a lot more– on a list of projects starting with a jewelry box, moving through new floors and ending on book cases.

  7. I would use them test my hypothesis which states that my inability to saw straight comes from having the wrong tool rather than lack of practice and patience :)

    And when I can finally do some decent saw work everything is going to be possible.

  8. Oh man, this set of saws would be a great asset to my tool collection. I am a jack of all trades so the numerous uses would be incredible. I’m always making things from found materials like branches and recycled wood as well as many other materials. I also do many projects around my house as I am a domestic engineer. I already own some japanese garden tools and an excellent kitchen knife so I can apreciate the quality of a japanese made tool. These would be cherished and used for many, many moons.

  9. I am a huge fan of both Make Magazine and these saws! If I win them, I will not only use them to make awesome enclosures, but I might perhaps start a bonzai business. Later in life, while moonlighting as a maintenance man for a nearby apartment complex, I will likely find some troubled teen to teach the art of bonzai pruning to (perhaps I will also teach him the ancient secrets of Karate so he can win the local karate tournament!)

    Anyway.. without these saws, my life will not be complete.

  10. I generally cut tenons by laying a workpiece flat on the table saw, and removing the material with a dado stack. But the tenon shoulders tend to split off, and are never quite square. These saws would be great for pre-cutting the shoulders: the small kerf will leave a smooth shoulder, then I can hog out the rest like I always have. I have a gent’s saw, and larger rip saws, but one is too big and the other too slow.

    Here is a link to some of my work:

  11. I recently purchased a composite airplane designed by Burt Rutan (of spaceship one fame), and I will be fabricating a new nose and some other parts from foam. These saws would cut through that foam like butter and get me to the shaping stage where the artistry and lots of sand paper begin. They would be an incredible timesaver!

    Best Regards,


  12. I’ve been wanting to get some fine-work tools and better saws to try my hand at making project boxes and enclosures. These would be awesome!

    Though, I feel bad, b/c hexmap (above) said he’d donate them to HeatSync…I probably should, too. I less-than-three my hackerspace :)

  13. As an avid potter, there’s always something I have to make in the studio. These saws look amazing and fit the handcrafted aesthetic of the studio, and would compliment some of the japanese turning tools I use. Fine steel, wood and clay.

  14. I’m in love with Japanese blades and have a large one for quickly cutting 2x4s but I’d love a set for finer joinery.

  15. I’ve been using one of those 10$ plastic “Japanese” inspired pull saws and loved it. The best use I had for it was trimming OSB sheets around barn roof pattern. I didn’t need to lift a router above my shoulders level and that was enough to justify owning one of these. Now, I always wanted to learn the art of manual mortise and tenon construction, maybe dovetail too. gimme gimme gimme.

  16. I have been designing a series of desktop/cubicle accessories to be constructed from wood for some time now (iPad Holder, Droid 2 holder, pen and pencil holder, and even a frame for the monitor to name a few). Some quality saws such as these will surely aid the R&D process of this plan.

  17. These are great for precise hand work. Used to use them all the time when I was a cabinet maker even with a shop full of tools.

    I would use them to make hand made cases for electronics I make. I dont have any of the tools to do it, or the room for them if I had them. These are small enough to store and capable of professional looking results.

  18. Give them to a good friend… a master craftsman… who just lost his wife. I know that they’d bring some joy back to his life.

  19. I would love to have these saws – they would come in handy building furniture and it’d be nice to use non-power tools every now and then.

  20. I’ve been coveting these forever! I would use them to make all my kitchen chairs un-wobbly, and then I would use them to make Quaker-locks and dovetail keys for secret drawers in the furniture I build. Hidden compartments are awesome. :)

  21. I learned basic joinery this fall with western style saws and I’m intrigued by devotion I’ve seen to pull saws. My next project (still in planning) is making a bunk bed with built in bookshelves and drawers.

  22. I’ve been in the planning for making shoji doors/screens in my spare time. The only things remaining are getting my workspace back (storing a car there temporarily) and the proper tools. This would satisfy the latter very well indeed!

  23. I would love to use these saws to make a box for my wife to take her pastels out in the field with her.

    Oh, and I second the trebuchet.

  24. My current saw tracks to one side and the cheap metal won’t let me set the teeth differently. I may finally get to move past test pieces with a blade made well from the start.

  25. I build longboards and want to get into building vintage skate decks. I try to use a low-tech approach, and would absolutely love to do all the work by hand. I’ve always wanted to try my hand at cutting complex designs by hand!

  26. I am still very new when it comes to woodworking, but I would use the tools immediately to help build the Plywood Coffee Table presented on this very website.

  27. My girlfriend is an avid amateur woodworker. She’s got her lathe, scroll saw, chisels, but THESE are some of the few tools she does not have in her arsenal.

    Help me save my relationship Garrett Wade!!! You’re my only hope!!

  28. FINALLY, I would be able to finish up the Unabox I started making a couple months ago. Do you know how frustratingly long it takes to get nicely fitted edges using only a large-tooth saw and a file?

  29. Well, maybe only rulers and tape measures rule… (sorry) But I love these saws and would be thrilled to expand my meager collection. They make short work of everything I do – from sawing off broken tree limbs to most carpentry work (rough or finish) – they are much more pleasurable to use than power tools!

  30. Ever since the Special edetion of Make: I have been eyeing the sawhorses, so depending on the tallent I bestow they will either become saw horses or the legs for a custom table. Then the saw horses..

  31. I have very fond memories of learning to saw with my Dad who used these Japanese saws exclusively (he always said they cut cleanly and more efficiently). I also remember our 3-hour trips with my Dad to the Bay Area to find the closest store that sold Japanese saws; they were in a locked glass display case along with a variety of other unique tools I had never seen at our local hardware stores. I still have and use the first thing I built with him: my own wooden toolbox with a knotted rope handle.

    I took a pretty different path in life from my Dad, but I’m at the point now where I am wishing I had learned more about woodworking from him. My robotics and electronics skill has grown to the point that I’m now making neat, finished pieces that others can display and use (rather than a rat’s nest of wires atop a protoboard). I’ve started calling my Dad regularly for his advise for building cabinets and enclosures for my projects; it’s funny how learning to program a microcontroller has brought me back around to woodworking.

    There are a lot of tools I’ll be needing to acquire as my knowledge of woodworking grows, and I look forward to getting my own set of Japanese saws like my Dad uses. My first kid is going to be born next month, and I can’t wait to help him build his first tool box too.

  32. First, cut the door casings in the bathroom so the new tile I’m installing will fit underneath.

    Then, assorted tenons for the shaker-style baby bassinet I’ll be making for the new baby.

    Then, if there’s time, the curio cabinet I’ve been meaning to build for years, to fill with anniversary gifts for my wife each year. An origami rose for the first year…

  33. I’d make a new case for my computer. New soap molds for my wife’s soapmaking. Really, what WOULDN’T I do with these?

  34. I would make boxes which would be filled with organic fruit and I would walk around and pass out free organic fruit to the little children.

    Im kidding, I would probably just cut a bunch of solid hard woods. Sexy Ryoba!

  35. I’d like to make a few proof of concept dovetail joints to learn the basics. But before I got to that I’m sure I’d saw all sorts of things.

  36. I’m not all that handy, and I can’t even play a musical instrument but I really want to make that cigar box guitar. If I had these saws, I would feel guilty not trying my best.

  37. I’d finish my box (currently a shelf) built to house my home theater PC (mac mini) hard drive, and amplifier. This is all to keep everything nice and tidy and away from my toddler’s hands.

  38. My friend is expecting his baby girl any day now and has been looking into trading power tools for hand tools so he can keep working while she naps.

  39. If I were to win these amazing saws, after showing them off to my family, friends & neighbors I’d build bookshelves, which I would show off to everyone who entered my home telling everyone these were made with the outstanding tools I got from Garret Wade!

  40. I’d like to say i’d build something beautiful, but i’m sure the first thing would be to hack the legs off the dining room table I despise…

  41. I’d teach my children how to cut really tight joints for soooooooooooo many projects – kites, canoes, kayaks, birdhouses, playhouses, magic tricks, skis? ……..whatever we can think of. I’d share with all my friends. I’d show my husband that I (BOLD) can use tools too! He’d love that. One daughter says she’d make a birdhouse and give it to her father. The other daughter says she’d make a wooden caterpillar and glue it to a background and make fancy designs on it.

  42. But that’s besides the point… :)

    I’m about to start building a new platform bed and these saws would be great for some of the detail work.

  43. I will put them on display above a roaring hearth fire, to be admired by the many sophisticates and well-to-dos who visit my parlour.

  44. I would use them in the many projects that I do that annoy my wife to no end. Not sure why she puts up with me, but glad she does.

  45. I’d use them to complete my custom bar build and instrument making.

    I’m sure they’d also make an appearance in my classroom when teaching jointing. All my tools end up at school it seems.

  46. Some of the projects that would make these really useful…

    Precise mortise and tenon work.
    Large dovetails, several inches across.
    Grafting trees.
    Hole cutting.
    Making odd-angle frames that my miter jig won’t handle and where the kerf on the power saws are too wide.
    Fine cuts for fitting moulding.

  47. be the impetus to get started on the 2nd of (at the moment) 3 planned themed siege engines related to local architecture. a smaller scale model with hand cut fittings would certainly go a ways to getting a full scale happening, and they’d be ideal for trim work on the bathroom remodel. wainscoting isn’t gonna cut itself.

  48. I’ve had plans to build a marimba (which is like a big xylophone) for ages but the prospect of cutting 61 keys to VERY precise lengths is daunting. Perhaps the desire to test a new toy like one of these saws would overcome the inertia and I’d get a playable instrument some time in 2011!

  49. i’ve only ever improvised what these are specifically made for…would be nice to have a proper set…

    ooooh, and flush cutting…

  50. With these saws it would be so much easier for Raven to finish his pinewood derby car without uneven cuts from a dull saw blade. And I always wanted to learn woodworking and use these saws to cut odd shape frames and furniture to include with my hobbie-stained glass.

  51. I have a young son, 15 months old, and I find that I’m constantly modifying or making things for him. Furniture gets changed to be more baby-friendly, toys are getting built, new shelves are being installed to get more stuff out of the way, I’m adding trim to places I’ve neglected so he doesn’t trip. These look like they’d be sweet for all of this since my current set of tools are pretty basic and I’m often going to the tool library for what I’m missing.

  52. I shall make grand use of these fine cutting intstruments for craftly makey learny projects both now in the good times, and later after the inevitable break down of society!

    Gizmo enclosures? Check!

    Sawing up furniture for the fires, staving off that chill nukulur winter? Check!

    Sawing up furniture to feed my Mosquito Coast(tm) type DIY refrigeration machine for the post polar ice cap melt global hothouse? Check!

    Music! These saws will make fine music when bowed, excellent for those waning days when entertainment is so important? Check!

    Other? Check!

    So, as you can see, they will be very well used!


  53. I’ve been trying to make my own version of out-of-print boardgames. This would be excellent for the intricate pieces I need to make.

  54. Using these saws, I hope to get better at creating dovetail joints. Which could possibly yield, among various things, a wooden computer case.

  55. I would use these saws in conjunction with my 3D scanner, homemade CNC, vacuum pump (and bags and stuff), and the many PCB-etching how-tos that I’ve read here on make to construct a lamp out of wood, copper, and surface-mount LEDs. I may include some stained glass as well, we’ll see… <3 you guys! Makers make on!

  56. I have always dreamed of starting a tool collection, and now I can make it happen! Bought a house with a large basement, that I plan on turning into my shop. I hope to make some Japanese lamps for the exterior of my house as the first project.

  57. I would use the saws to finish making the tea house style shoji doors for my farmhouse. Eventually I would like to construct an entirely authentic handmade Japanese house.

  58. Those would be perfect tools for me to use in restoring antique radios.
    Much of the detailed work fabricating replacement cabinet parts and veneers requires precision cutting. These would really help out!

  59. Yes, I would possibly continue my pinball machine, but likely would use these for carving out dioramas and terrain risers for LEGO models!

  60. i just started working on a glider rocker and ottoman for my sister in law and my first nephew. what with all the angled tenons in my design, i would love to have these saws!

  61. I would the Garrett Wade Japanese saw to build a custom entertainment center, with an interchangeable wood marquetry inlay for the cabinet door, so that the style could change with my skills. It would be sized to fit snuggly inside of an unused fireplace, extending just far enough to securely hold a flat screen.

  62. I’ve been kinda itching to try my hand at some minor crown moulding and trimwork projects, and these look they’ve be well-suited to that kind of precise cutting.

  63. I’m working on my own version of the Bare Bones Amp from MAKE Issue #23. In addition to having my own PCBs manufactured instead of using perf board, I’d like to make a nice wooden cabinet as opposed to the aluminum and Plexiglas cabinet shown in the article. These saws would be perfect for the job.

  64. For now, these beautiful saws would languish unused, dreaming of brighter days when they could finally rear up and use their keen teeth to tear apart the innards of their arch-enemy: WOOD! Sure, sure… SOMEDAY I would use them, and I would use them soooooo good. But right now, it’s getting cold in the garage, and it’s full of crap from my unfinished fall projects… I can be lazy like that sometimes… and eventually, when I DO use them, I’ll probably do something totally wrong, and completely mess up whatever half-baked plan I had to begin with, and probably even cut myself pretty seriously. But can you even IMAGINE how nice those wrong cuts would look!?!?! I mean, come on!!! Or how perfectly jagged the cut would be on my finger? I bet the surgeon would be like “Wow, what kind of saw were you using?” And I’d be all like “Dude, I was using the suhhhweeeet Garret-Wade pull-saw.” And he’d be all like “oh,” and I’d be all like “yeah.” So anyway, for now, I’ll just settle for dreaming of the day when I do not have to care for two toddlers, or finish the bathroom tile (not recommended for “fun”), or mow lawns, or wash cars, or run coax though a crawlspace in summer… **sigh** .. On second thought, you’d probably better not give these to me. But if you did, well, HOLD ON TO YOUR SEATS (until spring, anyway).

  65. I have this annoying neighbor that I have been thinking about having a little “chat” with. The only thing holding me back has been the thought of having to cut his body up with traditional PUSH saws — very inconvenient and messy. These would be PERFECT. The big ones for thighs etc. The cute little finger-sized one for, well, fingers.

    So yeah. Pick me!

  66. I love to make tobacco pipes (without power tools) and these would definitely speed up the rough shaping. Other projects might include a 48 bottle wine rack, arched desk lamp, and full-wall exploded-view wood framed photo album.

  67. I’d start by building the Most Useless Machine that my boys and I have been looking forward to digging into. Then I’d move on to building the wooden machinists toolbox that I’ve always wanted.


  68. This is the type of wood working tool that allows beautiful craftsmanship to show through. Yes, you can do good work with lesser tools, but it’s a mark of a good craftsman to know the right tool for the right job. These are great for flush cutting (without marring the surface), etc. One of a large number of tools that I’m sorely missing in my workshop.

  69. I’d darn near have these things in my bed with me at night! If it wasn’t for obvious dangers of such an endeavor… But I’d treat these tools with as much respect as they deserve, not to mention, using them only to cut the finest of hardwoods to finish up my cabinates in my kitchen (ok, I don’t use THE FINEST in my kitchen, but as good as I can find/recover/buy).

    They’d be perfect for doing small projects too, just as the ultimate useless machine project made from all hardwoods :)

    Good luck everyone!

  70. I just started with woodworking about a year ago. This Christmas, I’m trying to make hand made gifts for my family. These pull saws would certainly help me make accurate cuts for joinery. One of these gifts is a chest of drawers, which will require a lot of handcut dovetail joints.

  71. I don’t know where to start. After years of having tools around I see jewelry boxes and fly tying cases in some peoples future. :)

  72. I would work on mastering handcut dovetails to be able to finish the long list of furniture projects for our home, and document the lessons learned along the way to help out others.

  73. I’d build a music stand for my piano first…and then maybe a potting bench and a planter and a coffee table with built in storage space and possibly a cabinet to store my typewriter and I could make my own stretcher boards for mounting canvases… The possibilities are endless!

  74. First, I would build a custom ‘medicine cabinet’ to fill in the hole in my wall from whence an old wall heater once resided. My beautiful wife has patiently waited a year since we removed the heater. since we just bought the house, we are slightly financially challenged, so I got no cash to purchase tools required for said job. With two rug-rats, we do not have the space for power tools either.

    with these beautiful saws, all of my problems will be solved with one clean cut!

  75. I like to make wooden boxes and contraptions out of wood for people, PLUS Christmas is coming up so I think these would help me greatly, my old saw just inst “cutting it”. Also, I think that these saws would enable me to make projects that would seem impossible with an ordinary cope saw.

    -Captain Molo

  76. My wife has told me I really need a hobby. I’ve been wanting to get into woodworking, however it seems to be dominated by huge table-saws and loud routers that I can’t use in the house.

    I read about these Japanese saws a while back and thought about picking up a set to make some wooden puzzles (and replace some molding in the house to make the wife happy), but alas I don’t have money for everything.

    Receiving a set of saws would definitely kick my butt into gear to get active in a hobby. Thanks for the opportunity!

  77. I’ve always wanted to make a self bow and arrow set since I was a kid and daisy chained rubber bands together and attached them to a stick. Making a bow requires precise cuts, and since I have no bandsaw and a crappy hand saw left at my house when I bought it, I think a set of Japanese saws will fit the bill. Plus, I can make a set with my son and we can have wars… maybe I’ll stick with Nerf arrows though.

  78. I’m building my Girlfriend a media / sideboard for our living room, dovetailed drawers and and all. And I know the value of a good saw. Needless to say these babies would be used an awful lot in the weeks following their arrival.

    Fingers crossed.

  79. And then for my next trick I would repair the first shoji screen that I made and that my dog ate 1/3 of. It was Cedar and she was a puppy… she also liked Italian leather but that’s another story. I like to take furniture that i find and up-cycle the pieces; create something beautiful & useful out of the bad taste of the past.(Honestly, if I won then the first thing I would make would probably be a lot squealing excited noises whilst running around madly waving my arms.)

  80. I’m in the middle of a very long guitar build – so I’d use these fine tools in the construction of the neck. Japanese saws are the best thing to use (short of laser cutting) to cut the frets. As I don’t have any, I was going to buy a neck, but if I won these, I’d actually take the plunge and build the neck as well.

    Otherwise, I’ll have to save up and get them for the next guitar…

  81. What I would do with this fine set of saws is treasure each saw of the set as I cut with finesse the joints of my projects. Traditional Japanese carpentry honors the spirit of the tool, eschews sandpaper as barbaric, and punishes apprentices for merely touching a plane or blade without permission. Garrett Wade is offering an excellent version of traditional Japanese saws, to be coveted, entrusted with the care for, possessed but never owned, for it is the spirit of the tool which possesses the possessor.

  82. My latest woodworking effort is building a timber frame addition to the house, and a lot of pegs are crying out, “Cut me! Oh yeah, baby, use that Japanese pull saw!” And when I make furniture and boxes, these kinds of saws are awesome for dovetails, cutting shims and splines, making that last little final fitting cut, and tuning up joints and little parts. They give me joy and inspiration!

  83. I would learn to juggle the saws and then join the traveling circus. When I get really good I could add a flaming saw to the mix.

  84. I used to design and build telescopes, including grinding the mirrors and I miss it. These saws would help me get back into action.

    The shape of some of them would be perfect for internal panel cuts and ply parring to save mass while maintaining rigidity.

  85. I would replace my lower end pull saws and use the lovely dovetail and flush cut saws for my guitar projects… Cutting fret slots into hardwood is accomplished in no time with them! Have a strange, uncommon scale length you want to use? Whip up a little miter box, mark your lines and go to town! Much cheaper and faster than buying one custom made or having to settle for the more common scales, trust me :D

  86. I don’t know exactly what I’d use them for but I’m buying a house soon and I know I’ll be using the el cheapo one I already have a bunch.

  87. Japanese pull saws are amazing. With one of these I would build more kayaks, and teach others how to build their own kayaks. At Artisan’s Asylum in Somerville, MA!

  88. So I would use it to build bee hives, and a chicken coop, forms for concrete projects, a hill-top observatory, a secret fort in the woods, the possibilities are endless.

  89. We’re thinking of redoing our bathroom sinks, and it would be great to have a high-quality saw if we need to enlarge a hole for a new drop-in model.

  90. I would make toys and wood crafts for my children.

    And maybe help get rid of the bodies of my daughter’s would-be paramores in a decade or so.

  91. We restore WWII vintage aircraft. Not the monster aluminum type, but those that have the flying and control surfaces constructed of wood and fabric. These saws would be perfect!

  92. I would use these saws on grain surfboard kits, box making, hopefully eventually a wooden sailboat, and in general to build really cool stuff.

  93. I have been working out the plans to make an electric Viola for some time. I made an electric stand-up bass some years ago, but didn’t have the proper tools to make fine details and some of these saws could give me that edge for my Viola!

  94. I do Japanese woodblock printing and I need a new saw to cut my blocks to size. I’m sick of cutting beautiful maple, cherry and pine with a stupid hacksaw. Pretty please give me the saws. thanks

  95. I’d donate them to my hackerspace, Pumping Station: One. Just the other day someone was talking about these saws and the ability do to more precise cuts.

  96. I’m looking for something that would make some smooth-sided cuts for my custom wood computer cases. These would be perfect!

  97. I would use these saws to finally get myself started on a long-time dream: to build a set of cam, lever, and gear-driven wooden automatons.

  98. I will build my wife a vanity, so she doesn’t have to stand in front the bathroom mirror for an hour while I savor the stench of my morning breath. If that fails, I’ll build a second bathroom.

  99. Actually, the only thing I would do with these saws is cut, but I would cut on many, many, many projects, such as a set of jewelry display cases for my wife’s metalsmithing business, finish trim carpentry work throughout the house, complete the many small projects that litter my workshop, start on other new projects, and delight in making smaller pieces of wood from bigger pieces of wood!

  100. With the bad economy and few available jobs, I was able to secure a security job protecting our local Shogun. Since our village is financially strap there is no money available to buy a true Japanese Samurai sword. These saws are the closes things to the swords I can find. If I win, my Shogun will be safe.

  101. Well, Japanese saws are awesome for cutting relief in doorjambs for tile or hardwood floors, and as I am soon doing both of these, I will use them for that.

    I’m thinking about trying to build a guitar or mandolin, so I;m sure they would be handy for that.

    I have a bookcase and desk planned out that has been sitting around waiting for money, and even though the pieces will be cut on a water jet machine, the final installation will involve a lot of finicky little trim cuts, which these saws excel at.

    I will also use them to build the tool cabinet of my dreams, and if I do happen to win them, I will ensure they all get their own cozy home that will display their beauty.
    I also promise to feed and clean up after them, and take them for a walk every day. Wait, the walk thing was for a dog I was trying to win. But I WILL feed them plenty of wood and clean up their lovely little sawdust piles…

  102. First, I’d learn how to use them properly without harming myself or others, then, I’d build a Nixie Tube Clock with crazy awesome wood case.

  103. I’d give them to my 11 yo son who chipped the teeth off of identical saws I used to enjoy.
    He’ll likely build something made of foam, balsa and electrobits that flies, crashes, and then makes expensive sparks.

  104. It’s sad to admit it, but I’d use the Ryoba blade to make a clone of the Bridge City Toolworks “Jointmaker” saw. The two-edged Ryoba can be clamped in a rotating frame to stiffen the blade, making it easy to switch between rip and crosscut modes.

    If the work calls for a very fine cut, the stiffened back of the Dozuki saw would be called into play. As a crosscut blade, the Dozuki would be appropriate for most types of compound miter cuts.

    Sorry, this would necessitate using the saws without their nicely bamboo-wrapped handles.

  105. Trying to rebuild my shop after a break in several years ago, so what would I do with these saws? Why, MAKE, of course!

  106. I know of at least one other person who has said work bench.. but that is where I would start. Have to build the base for future projects first.

  107. I plan to turn old cigar boxes into a series of cases for other projects. They require more fine saws because of the wood.

  108. I’ve developed a love of woodworking from my Dad and would find myself making all kinds of shelves, cabinets, and drawing tables with these.

  109. Over a year ago, my youngest child requested I make a “real robot” with him. I was honored by his request, and happily agreed. A 3′ tall lightweight wooden framed robot is promised.
    To prepare for this big build, we have been building simple wooden and electronic projects together. He has shown the heart and drive for such a task, but is clearly in need of saws more easily used.
    My hopes for him are many, among them, to know the joy that comes from the patient use of fine tools.
    The gift of these quality saws, would allow him to build many “robot” parts, but more importantly, to build the self confidence we all wish for our children.
    Thank you for your concideration.

  110. Beautiful saws. I would use them first to cut dovetails for my sons’ dresser drawers. It’s a great project to show them how to use a handsaw (I might cut the actual dovetails, but I would have very engaged little helpers) and the fact that they cut on the pull stroke makes them a much safer saw to learn on.

    Beyond the dresser drawers, they would be used all the time in my shop. They’re not a one-job tool.

  111. The other day I was walking with my partner through the woods behind his house and in the middle of our lengthy trek I thought, “It would be great if we could open up one of these trees and find a beer waiting inside.” Since then, we’ve been enthusiastically drawing up plans to take an old stump and convert it into a TREEFRIGERATOR that can stow our frosty beverages…whether it end up in the den or out there in those woods! A nice set of handsaws, to use for all kinds of art/DIY projects, has been a wishlist item of mine for quite a while now. It would great to have such a lovely set as we tackle this feat together!


  112. Submissions are now closed on this giveaway. We’ll announce the winners soon. Thanks for all of your great comments. It’s really fun to see what all of our readers are up to and what projects they plan on/dream of doing.

  113. I’ve long wanted to build myself a new desk. If I won these I would be all over it!

    I’m in awe at the thought of the gorgeous joints I could do with some nice saws.

    Goodness, I hope I win.

    I also want to make worm boxes.

  114. I’m a metal sculptor by trade and have a beautiful little girl approaching two years old. She thinks all my sculptures are “pretty cool,” but being large heavy metal things, they’re not really something she can play with.

    I die a little bit every time my wife brings home some plastic play thing for her (as infrequently as that happens) so I thought I would make her some traditional wooden folk toys. My studio is almost exclusively set up for metal work, so some nice Japanese saws would go a long way towards getting me started on some toys sure to delight my daughter. And one day, when she’s old enough, they would be there for her to use in the shop as well.

  115. Well, I would use these saws to finish up some really nice knife kits that have been sitting for a while they have Cocobolo scales for the handles. I think the saws would be really neat to use for that and some other design work that I am doing these days, mostly project boxes and the like. I have a lot of older wood pieces that I could really go to town with from when my grandfather passed on and I received the old wood carving setups that he had. Along with all the old ham equipment and other machinist tools from when he worked as one at Honeywell.

    I hope i get these.

  116. My brother is currently working on his wood working bench, he’s been squaring up a big block of beach every night the last two weeks. Nothing would be better then to be able to give these to him when he finishes it. Happy Christmas everyone!

  117. The winner of the four-saw set is:


    And the winner of the Ryoba saw is:


    Congrats to both of you. Email sent.

Comments are closed.


Gareth Branwyn is a freelance writer and the former Editorial Director of Maker Media. He is the author or editor of over a dozen books on technology, DIY, and geek culture. He is currently a contributor to Boing Boing, Wink Books, and Wink Fun. And he has a new best-of writing collection and “lazy man’s memoir,” called Borg Like Me.

View more articles by Gareth Branwyn