Product review hero image

LulzBot Taz5

By Spencer Zawasky / Nov 12, 2015

LulzBot Taz5
see it in 360

LulzBot Taz5

3dPrint_Badges_2016_Taz5At a glance you can be forgiven if you don’t notice any difference between the Taz 4 and the Taz 5. But if you’ve been following LulzBot and their meteoric rise this past year, you’d have noticed that their smaller offering, the LulzBot Mini featured a new “Hexagon” all metal hot end, a self-calibrating platform, a frosted orangey-brown Polyetherimide (PEI) print surface, and Cura support. The Taz 5 brings three out of four (minus the self-leveling bed) of the Mini’s advances back to LulzBot’s flagship design, and the results reflect that.

HOT NEW HOT END

The new all-metal hot end includes an additional blower aimed straight at the heat-break. Many Taz 4 users printed a mod to divert cooling air to the printed material to help combat heat-creep, especially with some less cooperative PLAs. With this hot end, there’s no need. Plus, being all-metal, it is rated to 300°C (up from 240°C), expanding the variety of materials to include various nylons, polycarbonate, and PETT.

The hot ends now ship with 0.50mm nozzle apertures, although the more standard 0.35mm is still available. The larger opening makes it easier to put out more plastic per layer — and thus take advantage of the nearly cubic foot of print volume more quickly. It also reduces the stress of printing the newer filaments that contain various powdered materials (bronze, copper, steel, iron, etc.).

Nylon? No problem. A little glue stick, download the profile from Lulzbot.com, slice, and print.

The firmware even includes a dozen or so presets for various materials. This is the sort of experience that makes a user eager to try interesting new materials.

However, that new capability comes with the arguable loss of some fine detail, though you can get the 0.35mm nozzle if you really want it. (In fact, the old hot-end is still available if you want that too.) And the Taz retains its easy-to-swap tool head design — undo one-screw, unplug a few cables, and you’re done. Although, depending on what you swap, you may have to change firmware to match.

Taz 5 comes with a very sharp-looking power supply with its own metal case and thermally triggered fan. It is shorter than the Taz 4 supply, but otherwise larger which depending on your situation may or may not add to the already quite substantial footprint of the system. The fan is quite audible, but on intermittently and not particularly whiny or annoying.

POLYAMOROUS

The PEI has no real color, but lets you see through to the orange silicone heater pad firmly adhered to the bottom of the borosilicate glass plate. At times, it can be rather difficult to read how far above the translucent print surface the nozzle really is. To the touch, the PEI seems like nothing special, a bit like an acid etched glass surface. But when the plastic hits it, the magic happens.

ABS and HIPS both stick admirably to the PEI around the recommended 110°C range, and PLA does even better. But what is delightfully surprising is that, back down around room temperature, HIPS and ABS pop right off. If you are not a believer, you may try to pry your prints off of this surface before it has cooled. Woe is you. And while some PLA is a bit tougher to detach, even at room temperature, once you get it started it can come off violently. Before you realize it, all that force you were applying to remove the print will drive your knuckles full force into the fresh, sharp, plastic edges of your print.

For materials that don’t play as nicely with PEI, particularly Nylons, some glue stick comes to the rescue. The printer’s industry-leading documentation offers a table of materials, temperatures (nozzle, bed, and removal) as well as whether or not to use a glue stick.

The PEI surface itself is quite tough, and if you avoid trying to forcibly remove prints from the hot surface, it doesn’t suffer the gouges, nicks, and peeling that the Taz 4 PET tape surface does. A replacement sheet is available for less than $20.

A CURA FOR WHAT AILS

3dPrint_Badges_2016_Taz5_2Along with the Mini, the Taz 5 (and Taz 4) are now supported in Cura. LulzBot has provided you with its own branded version of Cura, though it’s not strictly necessary. We tested using the default settings and got great results with super-fast slicing. LulzBot has created six profiles (fine, medium, and fast, for 0.5mm or 0.35mm nozzles) for each printer and the acceptable materials, as well as a full array of Slic3r profiles. The stellar documentation has been augmented to include a full walk-through for Cura, as well as additional supporting information for using various materials.

CONCLUSION

It was hard to improve on the Taz 4, but a new hot end, a durable sticky-when-hot print surface, and some added, easy-to-use software options have certainly done it. Even better, the Taz 5 brings no controversial or ruinous downgrades to successful design. And while some may lament the lack of an automated platform level calibration, others may look at that as an unnecessary gimmick. The Taz 5 is a worthy successor, still true to its open heritage, and a match for any challenger.

Specs
Taz5 lulzbot.com
Price As Tested:$2,200
Build Volume:298×275×250mm
Bed Style:Heated, Glass covered with PEI print surface
Filament Size:3mm
Open Filament?:Yes
Temperature Control?:Yes, Tool head (260°C max)
Print Untethered?:Yes, SD card
Onboard Controls?:Yes, Display screen and control wheel
Host/Slicer Software:Cura LulzBot Edition (Slic3r still fully supported)
OS:Linux, Mac, Windows
Firmware:LulzBot Taz 5 Single extruder (Open Marlin Based)
Open Software?:Yes, CuraEngine is released under terms of the AGPLv3 License
Open Hardware?:Yes, Hardware is CC BY NC
Maximum Decibels:68.4

How this scored

Product Review Scores

See Scoring Criteria

ADVERTISEMENT

Why To Buy

Do you want big beautiful prints and a machine that is not only ready to take on anything but also ready to upgrade into the future? Then the Taz 5 is for you. The new all-metal hot end combined with the heated bed will take on any filament you throw at it. Open source everything means that when LulzBot or the community make updates, you can incorporate them as you choose.

Buy Now

Pro Tips

Muster your patience. That beautiful, fresh print will come off 100 times more easily if you let the platform cool down.

ADVERTISEMENT