Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Comments

  1. clare says:

    Try red Hongdan, check the sealing surface of the printed film to determine the sealing surface of the seal; or draw several concentric circles with a pencil in the valve disc and seat sealing surface, then the valves and valve seat seal rotate, check the pencil circle wipe, to determine the sealing surface of the seal. If the seal is not good, the available standard flat verify Industrial Mixer or gate sealing surface and the valve sealing surface to determine the grinding parts.

In the Maker Shed