Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

arthur ganson machine with concrete Arthur Gansons Machine with Concrete

skillbuilder concrete 158x158 Arthur Gansons Machine with ConcreteWe have sung kinetic machine artist Arthur Ganson’s praises often and loudly, here, before, but this particular work jumped out at me today while I was combing for concrete-themed stuff.  Machine with Concrete is a gear train consisting of twelve pairs of worms and gears, each of which reduces the rotational velocity of the system by 1/50.  The input shaft is constantly driven at 200 rpm, and the output shaft thus turns at (1/50)12 of that speed, at which rate, Ganson writes, “it will take well over two trillion years before the final gear makes but one turn.”

The punchline, of course, is that the final gear is embedded in a block of solid concrete.

I haven’t been able to figure out where Machine with Concrete currently lives; many of Ganson’s works are at the MIT Museum, but I couldn’t find any definitive information about this one, and would be glad to hear from anyone who knows.

Wherever its home, I wonder about its duty cycle: Has it been running continuously since completion? If it’s in a museum, is it only run during museum hours? And though it’s easy to calculate how long it will take the final gear to turn a given distance, a more interesting question, to me, is a bit trickier: How long until it sticks? And, given that each 50-fold reduction in speed is also a 50-fold gain in torque, will it stick at all, or just slowly grind through the concrete?

Update: As of April 17, 2013, Machine with Concrete is on indefinite loan to the Exploratorium, and is currently on view.  My understanding is that it still belongs to Ganson himself.  Thanks to tipster Adam Ringel and to Jericha Senyak at the Exploratorium.

Arthur Ganson Kinetic Sculpture

Sean Michael Ragan

I am descended from 5,000 generations of tool-using primates. Also, I went to college and stuff. I am a long-time contributor to MAKE magazine and makezine.com. My work has also appeared in ReadyMade, c’t – Magazin für Computertechnik, and The Wall Street Journal.


Related
blog comments powered by Disqus

Related Supplies at Maker Shed

Follow

Get every new post delivered to your Inbox.

Join 26,143 other followers